Ford E-250 Econoline Club Wagon Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,293)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,293)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Ford E-250 Econoline Club Wagon Brake Pad Replacement is $180 with $66 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Ford E-250 Econoline Club WagonV8-5.8LService typeBrake Pads - Rear ReplacementEstimate$496.79Shop/Dealer Price$564.75 - $701.12
1979 Ford E-250 Econoline Club WagonV8-7.5LService typeBrake Pads - Rear ReplacementEstimate$279.31Shop/Dealer Price$332.66 - $465.67
1988 Ford E-250 Econoline Club WagonV8-5.8LService typeBrake Pads - Rear ReplacementEstimate$436.79Shop/Dealer Price$504.80 - $641.20
1979 Ford E-250 Econoline Club WagonL6-4.9LService typeBrake Pads - Rear ReplacementEstimate$279.31Shop/Dealer Price$332.63 - $465.62
1986 Ford E-250 Econoline Club WagonV8-5.8LService typeBrake Pads - Front ReplacementEstimate$261.03Shop/Dealer Price$309.83 - $429.14
1980 Ford E-250 Econoline Club WagonV8-7.5LService typeBrake Pads - Rear ReplacementEstimate$303.30Shop/Dealer Price$354.41 - $467.18
1981 Ford E-250 Econoline Club WagonV8-6.6LService typeBrake Pads - Rear ReplacementEstimate$312.30Shop/Dealer Price$363.17 - $475.75
1988 Ford E-250 Econoline Club WagonL6-4.9LService typeBrake Pads - Front ReplacementEstimate$267.03Shop/Dealer Price$316.09 - $435.60
Show example Ford E-250 Econoline Club Wagon Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(1,293)

Rating Summary
1,238
30
10
7
8
1,238
30
10
7
8

Robert

23 years of experience
253 reviews
Robert
23 years of experience
Ford E-250 Econoline Club Wagon V8-5.8L - Electric Problems Inspection - Crosby, Texas
Very knowledgeable. Confirmed what I felt was the problem. I was a bit disappointed that the repair could not be accomplished at my home and suggested I take truck to electrical repair shop.

Henry

34 years of experience
170 reviews
Henry
34 years of experience
Ford E-250 Econoline Club Wagon L6-4.9L - Air Shocks Replacement (Front) - Clayton, New Jersey
Henry always gets right to work. he does a great job!

William

34 years of experience
517 reviews
William
34 years of experience
Ford F-150 V8-4.6L - Brake Pads Replacement (Front) - Phoenix, Arizona
Very good service fast and friendly.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Ford Edge V6-3.5L - Brake Pads Replacement (Front, Rear) - Chicago, Illinois
Always professional and does excellent work.

Excellent Rating

(1,293)

Rating Summary
1,238
30
10
7
8
1,238
30
10
7
8
Number of Ford Brake Pad Replacement services completed
14223+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Instrument Voltage Regulator
Common signs include dim or flickering gauges, inaccurate or erratic readings from the voltage regulator, and an inoperable instrument cluster.
How to Find the Source of an Oil Leak
Oil Oil leaks are a very common problem that affects many car owners. Virtually all modern engines use some sort of oiling lubrication system, and a compromise in the sealing of this system will result in an oil leak. Whether...
The Best Tool for Mechanics Working on Cars With Limited Clearance Areas
Automotive technician jobs require tool sets that allow mechanics to reach tight spaces. Craftsman has a handy low clearance ratchet and socket set.

Not shifting out of park to drive

The brake light switch or interlock solenoid are the possible causes of your problem. The brake light switch may be malfunctioning and not turning on the brake lights or disengaging the shift interlock. I suggest having a certified mechanic, such...

My break is as if it is always being pressed on even when I don't touch it. What can cause this?

Hello. From what you've described, your car has a bad brake light switch. This switch is located on the brake pedal assembly under the dash. It starts to fail and in most cases the smallest amount of movement will allow...

Sluggish power & oil light cam on saying that it's low. I just had the oil changed

Hello. If the oil level was low, then it will cause these codes (P0016 (https://www.yourmechanic.com/article/p0016-obd-ii-trouble-code-camshaft-position-a-camshaft-position-correlation-bank-1-by-jay-safford) and P0017 (https://www.yourmechanic.com/article/p0079-obd-ii-trouble-code-crankshaft-position-camshaft-position-correlation-bank-1-sensor-b-by-jay-safford)) to appear. The variable valve timing system on this vehicle is controlled with oil pressure so when the oil level is low...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com