Ford E-150 Club Wagon Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford E-150 Club Wagon Fuel Injector Replacement is $639 with $496 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Ford E-150 Club WagonV8-5.4LService typeFuel Injector ReplacementEstimate$1165.09Shop/Dealer Price$1428.24 - $2183.94
2003 Ford E-150 Club WagonV8-5.4LService typeFuel Injector ReplacementEstimate$1819.89Shop/Dealer Price$2254.26 - $3523.59
2005 Ford E-150 Club WagonV8-4.6LService typeFuel Injector ReplacementEstimate$2337.01Shop/Dealer Price$2900.66 - $4557.82
2004 Ford E-150 Club WagonV8-5.4LService typeFuel Injector ReplacementEstimate$1819.89Shop/Dealer Price$2254.23 - $3523.52
2004 Ford E-150 Club WagonV8-4.6LService typeFuel Injector ReplacementEstimate$2073.33Shop/Dealer Price$2571.09 - $4030.50
2003 Ford E-150 Club WagonV8-4.6LService typeFuel Injector ReplacementEstimate$2073.33Shop/Dealer Price$2571.06 - $4030.46
2003 Ford E-150 Club WagonV6-4.2LService typeFuel Injector ReplacementEstimate$1691.77Shop/Dealer Price$2073.90 - $3160.26
Show example Ford E-150 Club Wagon Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(9)

Rating Summary
7
1
1
0
0
7
1
1
0
0

Latora

14 years of experience
9 reviews
Latora
14 years of experience
Ford E-150 Club Wagon V8-5.4L - Brake light is not working Inspection - Houston, Texas
he was totally awesome i will recommend him to everyone

Rocco

22 years of experience
302 reviews
Rocco
22 years of experience
Ford E-150 Club Wagon V8-5.4L - Inertia Switch - Riverside, California

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Ford E-150 Club Wagon V8-5.4L - Oil Change - Kansas City, Missouri
Andy completed the work very efficiently and is very very personable.

Allen

36 years of experience
471 reviews
Allen
36 years of experience
Ford E-150 Club Wagon V8-5.4L - Differential / Gear Oil Replacement (Rear) - Daytona Beach, Florida
Always very knowledgeable on the repair/maintenance he is performing.

Excellent Rating

(9)

Rating Summary
7
1
1
0
0
7
1
1
0
0
Number of Ford E-150 Club Wagon services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Kia Forte
While While Toyota and Honda have reigned supreme in the compact sedan and five-door hatchback classes for years, Kia has been rolling out more and more high-quality models with really attractive features than ever before. While Korean cars are traditionally...
How to Prepare for the Wisconsin Driver’s Written Test
If If you are looking forward to getting your license in Wisconsin, you first need to take your written driver’s exam so you can get your learner’s permit and then take the road test. The written exam, as long as...
How To Measure Driveshaft Length
The The driveshaft (https://www.yourmechanic.com/article/how-long-does-a-driveshaft-last) of a vehicle transfers the torque or power from the vehicle's transmission to the wheel axles. If your car is a front-wheel drive, the power is sent to the two front wheels. If it is a...

Can I replace the ignition lock cylinder without removing the steering wheel?

Hi there, thanks for writing in. I'd be happy to help. Unfortunately, in order to replace the ignition lock cylinder (https://www.yourmechanic.com/article/how-to-replace-an-ignition-lock-cylinder-by-timothy-charlet), you need to remove the steering wheel. If you do not remove it, you cannot remove the screws that...

Car is knocking when I hit the gas

Hi and thanks for contacting Your Mechanic. If the engine has a knocking noise, a sensor will not cause this issue. A timing belt will not cause a knock unless the timing belt has jumped a tooth. Other belts just...

I just did a pre-purchase diagnostic on a 2010 LR2 with 106.5k miles, which turned up no problems except "seepage" between the mot

Hi there. I haven't laughed this hard in a while....thanks for the "can this marriage be saved" line. But, your spouse does have a point. A Land Rover with any indication of seepage or a seal being damaged is a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com