Ford Bronco II Ignition Cable (Spark plug wires) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Ignition Cable (Spark plug wires) Replacement Service

How much does a Ignition Cable (Spark plug wires) Replacement cost?

On average, the cost for a Ford Bronco II Ignition Cable (Spark plug wires) Replacement is $183 with $43 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Ford Bronco IIV6-2.9LService typeIgnition Cable (Spark plug wires) ReplacementEstimate$249.50Shop/Dealer Price$276.73 - $350.30
Show example Ford Bronco II Ignition Cable (Spark plug wires) Replacement prices

What is the Ignition Cable (Spark plug wires) all about?

The ignition cables, also known as “spark plug wires” are part of the ignition system. They transfer the spark from the distributor or ignition coil to spark plugs that ignite the air-fuel mixture, starting the engine.

Over time, the cables can get weak and break down. This will make it harder for the spark to reach the engine cylinders, resulting in engine misfires. The car may not start at all. If one of the spark plugs has gone bad, the car will still start and run, but it will run poorly.

Keep in mind:

  • Ignition cable failure is often caused by other failing pieces in the ignition system; a mechanic should check for any other malfunctioning parts, and replace any parts of the system that don’t work.
  • Every time the ignition cables are replaced, the spark plugs should be inspected.
  • Leaking oil or coolant can cause ignition wire failure. If this is the case, the cause of the leak should be repaired or replaced, or else the new ignition wires will quickly be damaged as well.

How it's done:

  • Scan the computer system in the car for codes.
  • Inspect ignition cables (look for white spots).
  • Ohm test on individual cables.
  • Remove and replace the cables if found faulty.
  • Inspect the spark plugs.
  • Clear the codes.

Our recommendation:

Ignition wires should be replaced at least every 60,000 miles, but whenever your car is serviced, it’s a good idea to have the entire ignition system inspected. Any time that you have spark plugs replaced, it’s a good idea to have the ignition wires replaced as well. If you notice that your engine is running poorly, you should schedule an inspection.

What common symptoms indicate you may need to replace the Ignition Cable (Spark plug wires)?

  • Check Engine light is on.
  • Engine misfires.
  • Poor gas mileage.
  • Engine may shake (light vibration).

How important is this service?

The fuel in your automobile is ignited by a spark. This starts with the ignition coil, which transforms low voltage power into extremely high voltage. This high voltage is transferred through the ignition cables, and to the spark plug, where a spark is created that ignites the engine’s fuel, and powers the engine.

When one or more ignition cables fail, this voltage will not be transferred from the ignition coil to the spark plugs, and the fuel will not be ignited. Depending on how many of your ignition cables malfunction, your car will either run poorly, or won’t run at all.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(26)

Rating Summary
23
2
0
0
1
23
2
0
0
1

Charles

28 years of experience
22 reviews
Charles
28 years of experience
Ford Bronco II V6-2.9L - Ignition Switch - Cibolo, Texas

Colby

15 years of experience
66 reviews
Colby
15 years of experience
Ford Bronco II V6-2.9L - Car is not starting - Denver, Colorado
I was satisfied with colby c. up front honest and professional knowledge on my older ford.

Ramon

21 years of experience
166 reviews
Ramon
21 years of experience
Ford Bronco II V6-2.9L - Car is not starting - Tucson, Arizona
GREAT JOB

Jean

16 years of experience
157 reviews
Jean
16 years of experience
Ford Bronco II V6-2.9L - Coolant Temperature Switch (Sensor) - Palm Harbor, Florida
Jean is easy going and will go beyond to get your repair completed well.

Excellent Rating

(26)

Rating Summary
23
2
0
0
1
23
2
0
0
1
Number of Ford Bronco II services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

P0674 OBD-II Trouble Code: Cylinder 4 Glow Plug Circuit
P0674 code means when the voltage from the glow plug circuit has a variance of 10 % over manufacturer specs due to a faulty plug, relay, or wiring.
P0079 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0079 code definition Exhaust Valve Control Solenoid Circuit Low (Bank 1) What the P0079 code means P0079 indicates an issue that is...
P2175 OBD-II Trouble Code: Throttle Actuator Control System Low Airflow Detected
P2175 P2175 code definition Throttle Actuator Control System Low Air Flow Detected What the P2175 code means P2175 is an OBD-II generic code for the engine control module (ECM) detecting that the air flow into the engine was not at...

Just had the intake manifold replaced and now got it back from the mechanic and the car runs like crap an sounds bad

It's hard to give a specific answer with the amount of information supplied. I would need to see the vehicle to hear and see the problem myself. Why was the intake manifold in need of replacement? Was it a recall...

I accidentally put diesel in my Mercedes gas tank.

How much damage you did depends on how strong the mixture of diesel was and how far you drove. If the tank was nearly empty you may have messed some stuff up. Getting the car running may not be a...

The hazards come on when i turn either left or right signal switch.

Generally this is something caused by the flasher relay (https://www.yourmechanic.com/services/hazard-turn-signal-flasher-replacement) going bad. This is a small relay that allows the lights to flash based upon current flow and a resistor inside that causes them to flash. When this is faulty,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com