Ford Bronco II Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(25)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(25)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Ford Bronco II Hazard / Turn Signal Flasher Replacement is $125 with $30 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1984 Ford Bronco IIV6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$175.09Shop/Dealer Price$200.12 - $252.69
1985 Ford Bronco IIV6-2.8LService typeHazard / Turn Signal Flasher ReplacementEstimate$155.09Shop/Dealer Price$180.13 - $232.72
1986 Ford Bronco IIL4-2.3L Turbo DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$193.91Shop/Dealer Price$228.66 - $310.36
1986 Ford Bronco IIV6-2.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.86 - $369.88
1988 Ford Bronco IIV6-2.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.90 - $369.95
1989 Ford Bronco IIV6-2.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$223.69Shop/Dealer Price$265.88 - $369.92
1987 Ford Bronco IIV6-2.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$228.69Shop/Dealer Price$270.75 - $374.68
1985 Ford Bronco IIL4-2.3L Turbo DieselService typeHazard / Turn Signal Flasher ReplacementEstimate$198.91Shop/Dealer Price$233.89 - $315.78
Show example Ford Bronco II Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(25)

Rating Summary
22
2
0
0
1
22
2
0
0
1

Dameron

17 years of experience
172 reviews
Dameron
17 years of experience
Ford Bronco II V6-2.9L - Alternator - Beech Grove, Indiana
Installed new alternator quickly. Works great. Thanks!

Scott

34 years of experience
551 reviews
Scott
34 years of experience
Ford Bronco II V6-2.9L - Starter - Denver, Colorado
Scott did a great job I’d recommend him to anyone.

Ramon

20 years of experience
166 reviews
Ramon
20 years of experience
Ford Bronco II V6-2.9L - Car is not starting - Tucson, Arizona
GREAT JOB

Nolan

30 years of experience
209 reviews
Nolan
30 years of experience
Ford Bronco II V6-2.9L - Coolant Temperature Switch (Sensor) - Tucson, Arizona
Great job

Excellent Rating

(25)

Rating Summary
22
2
0
0
1
22
2
0
0
1
Number of Ford Bronco II services completed
275+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

What Steps Must I Take Before Buying a Used Car?
Buying Buying a used car can feel like a very scary situation when it's your first time doing so. There are so many options and sometimes people can be impulsive and end up getting a vehicle that doesn't suit them....
P0895 OBD-II Trouble Code: Shift Time Too Short
P0895 code means that there is an abnormality in the shift time between individual gears due to transmission blockage, failure, or dirty fluid.
B1919 OBD-II Trouble Code: Air Bag Memory Clear Circuit Short To Battery
B1919 means there is something wrong with the Supplemental Restraint System (SRS) memory clear circuit, likely due to an electrical issue.

Bad clutch in my truck

Hello! Thank you for writing in with this question. This generation of Tacoma has an adjustable clutch pedal assembly. As outlined in the Tacoma service manual, if the assembly is out-of-adjustment, it could cause slipping. A local mechanic (like those...

Truck makes loud noise when accelerating

Hello. There are multiple things that may cause loud noises when stepping on the gas pedal such as axles,valve lifters, and catalytic convertors. I suggest having a technician inspect the vehicle as again there are several things that may cause...

Stalling upon startup when cold, error code P0102

The P0102 code (https://www.yourmechanic.com/article/p0102-obd-ii-trouble-code-mass-airflow-maf-circuit-low-voltage-input-by-john-nelson) indicates a fault with the mass airflow sensor system. The mass air flow or MAF is a sensor that is used to monitor the air coming into the engine. Many of these include an intake air...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com