Dodge Wm300 Pickup Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(75)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(75)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Dodge Wm300 Pickup Control Arm Assembly Replacement is $184 with $89 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$593.73Shop/Dealer Price$723.42 - $1089.97
1967 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$558.67Shop/Dealer Price$684.61 - $1039.88
1967 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$398.99Shop/Dealer Price$485.01 - $720.52
1967 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$625.71Shop/Dealer Price$745.01 - $1042.18
1967 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$660.13Shop/Dealer Price$811.45 - $1242.83
1968 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$558.67Shop/Dealer Price$684.61 - $1039.88
1968 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$665.13Shop/Dealer Price$816.30 - $1247.56
1968 Dodge Wm300 PickupL6-4.1LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$403.99Shop/Dealer Price$490.24 - $725.94
Show example Dodge Wm300 Pickup Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(75)

Rating Summary
67
7
0
0
1
67
7
0
0
1

Ryan

22 years of experience
48 reviews
Ryan
22 years of experience
Dodge Stratus L4-2.4L - Control Arm Assembly Replacement (Front Lower Left) - Salisbury, North Carolina
Professional.

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Dodge Ram 1500 V8-5.9L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Hampton, Virginia
This is not my first experience with Matthew or Your Mechanic. I have been very satisfied with Matthew's & Your Mechanic service.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Dodge Ram 1500 V8-4.7L - Control Arm Assembly Replacement (Front Upper Left, Front Lower Left) - Murrieta, California
good

Mark

18 years of experience
72 reviews
Mark
18 years of experience
Dodge Caliber L4-1.8L - Control Arm Assembly Replacement (Front Lower Left) - Cincinnati, Ohio
Mark is superbly professional. He arrived early, was patient with my lack of cell phone service, performed the work in a timely manner, explained additional services that needed performed, and completed the repairs expertly. Highly recommend Mark for your service needs.

Excellent Rating

(75)

Rating Summary
67
7
0
0
1
67
7
0
0
1
Number of Dodge Control Arm Assembly Replacement services completed
825+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P2093 OBD-II Trouble Code: A Camshaft Position Actuator Control Circuit High Bank 2
P2093 P2093 code definition The P2093 code is a general OBD-II diagnostic trouble code indicating a fault with the “A” camshaft position actuator control circuit high bank 2. What the P2093 code means The camshaft position sensor “A” is indicating...
How to Replace an Evaporator Temperature Sensor (Switch)
The air conditioning system has an evaporator temperature sensor that fails when there is no cold air or the air conditioning is inconsistent.
P0448 OBD-II Trouble Code: Evaporative Emission Control System Vent Control Circuit Shorted
P0448 code appears when the PCM detects that the circuit for the evaporative emission control system's vent has shorted or valve is stuck.

why does my car keep stalling when i come to a stop today it just turned off and now it wont start i already changed the fuel pump

Hi there. If you tested the fuel pump and noticed that it was not "humming" that's either an indication of a fuel pump electrical relay (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-pump-relay) (as you suggested) or a fuse that is broken. It could also indicate that...

My car loses power then won't go over 20 mph its a 05 pontonic grand prix

Hi April. The Reduced Power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in...

Battery dies when the car is parked

If the battery is discharging while the vehicle is "off", and/or where you have commanded all circuits "off", that means that there is a phantom load somewhere in the vehicle electrical system. A contributing factor could be a faulty charging...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com