Dodge W350 Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge W350 Fuel Injector Replacement is $1178 with $1038 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1991 Dodge W350V8-5.9L	Service typeFuel Injector Replacement	Estimate$3422.74	Shop/Dealer Price$4243.28 - $6696.78
1991 Dodge W350L6-5.9L Turbo Diesel	Service typeFuel Injector Replacement	Estimate$2601.69	Shop/Dealer Price$3217.45 - $5060.60
1993 Dodge W350V8-5.9L	Service typeFuel Injector Replacement	Estimate$3442.93	Shop/Dealer Price$4262.09 - $6714.57
1992 Dodge W350L6-5.9L Turbo Diesel	Service typeFuel Injector Replacement	Estimate$2601.69	Shop/Dealer Price$3217.47 - $5060.64
1992 Dodge W350V8-5.9L	Service typeFuel Injector Replacement	Estimate$3413.73	Shop/Dealer Price$4234.00 - $6687.30
1990 Dodge W350V8-5.9L	Service typeFuel Injector Replacement	Estimate$2907.33	Shop/Dealer Price$3599.66 - $5672.17
1993 Dodge W350L6-5.9L Turbo Diesel	Service typeFuel Injector Replacement	Estimate$2630.89	Shop/Dealer Price$3247.06 - $5090.52
1990 Dodge W350L6-5.9L Turbo Diesel	Service typeFuel Injector Replacement	Estimate$2221.89	Shop/Dealer Price$2742.72 - $4301.04

Show example Dodge W350 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(25)

Rating Summary

24

0

1

0

0

24

0

1

0

0

SEE REVIEWS NEAR ME

CHRISTOPHER

14 years of experience

11 reviews

Request CHRISTOPHER

CHRISTOPHER

14 years of experience

Request CHRISTOPHER

by Shawn

Dodge Charger V6-3.5L - Fuel Injector - Pittsburgh, Pennsylvania

He was early. Looked over car inside and out and he was quick and did a good clean job. I appreciate your service. SEMPER FI

Andrew

20 years of experience

7 reviews

Andrew

20 years of experience

by Jarod

Dodge Ram 1500 V8-4.7L - Fuel Injector - Elk Grove, California

Showed up almost 30 minutes early and wasted no time getting to work on my truck! Andrew seems very knowledgeable and worked in a very fast but thorough manner. Would definitely use his service again.

Keith

19 years of experience

406 reviews

Keith

19 years of experience

by Janice

Dodge Dakota V6-3.7L - Fuel Injector - Winter Haven, Florida

Amazing! On time, problem resolved. Very professional. Highly recommend.

Eliud

24 years of experience

312 reviews

Eliud

24 years of experience

by Stacey

Dodge Durango V8-4.7L - Fuel Injector - Loganville, Georgia

Goes above & beyond duty

Excellent Rating

(25)

Rating Summary

24

0

1

0

0

24

0

1

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

How to Decide on a Car Paint Color

Are Are you repainting an old vehicle? Or are you trying to choose a paint color for your next car? There are a number of factors to consider when choosing a paint color for your car, and if the job...

P0166 OBD-II Trouble Code: O2 Sensor Circuit No Activity Detected (Bank 2, Sensor 3)

P0166 P0166 Code Definition O2 Sensor Circuit No Activity Detected (Bank 2, Sensor 3) What the P0166 code means The P0166 code means that the third oxygen sensor on the second bank of the exhaust has failed or is not...

Is a Keyless Push-Button Ignition More Reliable?

Vehicle Vehicle starting systems have evolved significantly since their inception. When automobiles were initially introduced, you had to manually crank the engine over with a handle on the front of your engine compartment. The next phase involved a lock and...

1977 Mercedes-Benz 240D cranking, but not starting

Hi there. Either one or multiple glow plugs maybe malfunctioning. Also there maybe a fuel delivery probably as well. If there is not enough fuel ores in your system, then your vehicle will not start. This diagnoses needs to be...

I put a fuel injector cleaner in my car and had been stalling at a stop and lags when I'm driving. New fuel filter, still stalling out.

For the condition of the engine rpm's changing either the Idle Air Control valve is not working properly and needs cleaned out or the EGR valve is sticking causing the engine to bog down and stall out. I recommend taking...

I opened my trunk by accident in the house with my keypad, can I lock it back using the keypad?

You cannot use the remote to close a trunk after you have opened it. You will need to close it manually.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com