Dodge W150 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(399)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(399)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Dodge W150 Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Dodge W150V8-5.2LService typeCar Battery ReplacementEstimate$470.47Shop/Dealer Price$569.34 - $843.45
1993 Dodge W150V6-3.9LService typeCar Battery ReplacementEstimate$450.47Shop/Dealer Price$549.36 - $823.48
1978 Dodge W150V8-5.9LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1978 Dodge W150L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1979 Dodge W150V8-5.9LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1984 Dodge W150L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1990 Dodge W150V8-5.2LService typeCar Battery ReplacementEstimate$455.47Shop/Dealer Price$554.22 - $828.24
1992 Dodge W150V8-5.2LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Dodge W150 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(399)

Rating Summary
383
10
2
2
2
383
10
2
2
2

Peter

13 years of experience
3 reviews
Peter
13 years of experience
Dodge W150 V8-5.2L - Car is hesitating and bucking Inspection - Richmond, Virginia
It was overall a great experience

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Dodge Avenger L4-2.4L - Battery - Charlotte, North Carolina
very quick and done a great job!

Alexander

20 years of experience
113 reviews
Alexander
20 years of experience
Dodge Journey V6-3.6L - Car Battery Replacement - Orlando, Florida
This mechanic was very friendly and hard working! He showed up early because he had time to do so and worked on the Dodge Journey while it was in a tricky spot. The repair was completed correctly and fast!!!

Kiri

20 years of experience
372 reviews
Kiri
20 years of experience
Dodge Intrepid V6-3.5L - Battery - Norristown, Pennsylvania
Kiri completed the work in a reasonable time. He always does great work for me.

Excellent Rating

(399)

Rating Summary
383
10
2
2
2
383
10
2
2
2
Number of Dodge Car Battery Replacement services completed
4389+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Get a Georgia Driver's Permit
Georgia Georgia is another state that uses a graduated driver's licensing program, which most states require. This program states that those under 18 must obtain a learner’s permit, that slowly graduates to a full license as the driver gains experience...
P0476 OBD-II Trouble Code: Exhaust Pressure Control Valve Range/Performance
What What the P0476 code means During the exhaust back pressure step test, the engine control module (ECM) commands and measures a preprogrammed exhaust pressure and then measures time for pressure decay during your vehicle’s engine running test. The exhaust...
The Guide To Colored Curb Zones in Vermont
Vermont Vermont parking laws: understanding the basics Drivers in Vermont need to pay careful attention to where they park their vehicles. It is just as important to know the regulations and laws about parking as it is to know all...

Some mornings (the past couple of mornings) my car wouldn't start, not even turn over, 1991 Acura Integra

Hello - I believe your "no start" or "hard start" is a problem with the Neutral Safety switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-neutral-safety-switch) (sometimes called a "range sensor". It determines that your transmission is in either Park or Neutral, and allows the car to...

Coolant leaking when I turn the AC on

Coolant leaks (https://www.yourmechanic.com/services/coolant-is-leaking-inspection) are generally noticeable with or without the AC on as the AC should not have any impact on the coolant system other than the fact that the engine works a bit harder when the AC is on....

I fell asleep at the wheel and i drove over bricks in a yard my car is now running hot, coolant leaks pan under car fell off

Your car should be inspected to determine the origin of the coolant leak and, for your safety, to verify that no other undercar components were damaged in the incident. Once a complete picture is assembled, the mechanic will fully inform...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com