Dodge Ramcharger Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Dodge Ramcharger Brake Pad Replacement is $200 with $60 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Dodge RamchargerV8-5.2LService typeBrake Pads - Rear ReplacementEstimate$629.60Shop/Dealer Price$681.55 - $813.10
1991 Dodge RamchargerV8-5.9LService typeBrake Pads - Rear ReplacementEstimate$602.57Shop/Dealer Price$649.22 - $776.80
1993 Dodge RamchargerV8-5.2LService typeBrake Pads - Rear ReplacementEstimate$514.98Shop/Dealer Price$560.59 - $687.38
1993 Dodge RamchargerV8-5.2LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$378.82 - $501.33
1993 Dodge RamchargerV8-5.9LService typeBrake Pads - Rear ReplacementEstimate$514.98Shop/Dealer Price$564.12 - $693.57
1991 Dodge RamchargerV8-5.2LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$378.99 - $501.62
1990 Dodge RamchargerV8-5.9LService typeBrake Pads - Rear ReplacementEstimate$602.57Shop/Dealer Price$649.34 - $777.01
1990 Dodge RamchargerV8-5.2LService typeBrake Pads - Front ReplacementEstimate$336.31Shop/Dealer Price$378.82 - $501.33
Show example Dodge Ramcharger Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Nicholas

12 years of experience
691 reviews
Nicholas
12 years of experience
Dodge Ramcharger V8-5.9L - Starter - Wake Forest, North Carolina
A-1 Service and A-1 expedience. I would definitely recommend Nick again!! As a matter of fact, I would like to make another appointment for my truck, and I Definitely want to request Nick to do the work!! Thank you for putting the good starter in my truck!!

Diego

22 years of experience
564 reviews
Diego
22 years of experience
Dodge Ramcharger V8-5.2L - Fuel Pump - Phoenix, Arizona
Simply amazing. Couldn't have asked for a better mechanic. Helped me with all my problems that came forthright. Very knowledgeable.

Choeun

16 years of experience
181 reviews
Choeun
16 years of experience
Dodge Ramcharger V8-5.9L - Oil Pan Gasket - Sacramento, California
Choeuns was on time and very professional. He has a very tasked job but was able to complete everything. He gave me confidence in my car and was very honest with me. Would love to have him work on my cars in the future!

Alexander

21 years of experience
113 reviews
Alexander
21 years of experience
Dodge Ramcharger V8-5.9L - Distributor - Orlando, Florida
Alex is the best! Helped me pinpoint what I need to get my truck running tip top. Would highly recommend!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Dodge Ramcharger services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P2662 OBD-II Trouble Code: B Rocker Arm Actuator Sys Stuck On Bank 2
P2662 means an issue within the rocker arm actuator function which may cause rough idling, choppy acceleration and poor engine performance.
Child Seat Safety Laws in Tennessee
Tennessee Tennessee was the first state to pass laws that require children to be restrained in car seats and booster seats. Other states swiftly followed suit, creating laws based in common sense to protect children from injuries and death on...
B1943 OBD-II Trouble Code: Airbag Crash Sensor #1 Short to Ground
B1943 means there is a discrepancy in the voltages to two terminals in the airbag circuit, likely due to an open circuit in a sensor.

How do you program the universal garage door opener to work with a Fixed Code system?

If your car has a universal garage door opener (optional equipment), then it can be programmed to work with both Rolling Code systems and Fixed Code systems. Here’s what you should do to program it to work with your Fixed...

It is making a roaring noise.

Hi there. That's a very good question; however, we need a bit more information in order to give you an accurate idea as to what's causing this roaring sound. If the roaring sound is coming during acceleration, it could be...

Viewing my hands free call log

Hi there. In order to answer any questions, we need to know the year, make and model of your car, truck or SUV. Different cars have different settings for OnStar services. The best resource to get this information is the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com