Dodge Ram 3500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(55)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Dodge Ram 3500 Front Crankshaft Seal Replacement is $153 with $20 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Dodge Ram 3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$291.18Shop/Dealer Price$332.11 - $416.64
2001 Dodge Ram 3500V8-5.9LService typeFront Crankshaft Seal ReplacementEstimate$178.41Shop/Dealer Price$203.79 - $248.37
1997 Dodge Ram 3500L6-5.9L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$216.31Shop/Dealer Price$251.16 - $324.17
2003 Dodge Ram 3500L6-5.9L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$343.63Shop/Dealer Price$393.79 - $485.77
2009 Dodge Ram 3500L6-6.7L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$305.64Shop/Dealer Price$351.88 - $440.93
2000 Dodge Ram 3500V8-5.9LService typeFront Crankshaft Seal ReplacementEstimate$178.41Shop/Dealer Price$203.79 - $248.37
1996 Dodge Ram 3500V8-5.9LService typeFront Crankshaft Seal ReplacementEstimate$180.59Shop/Dealer Price$204.57 - $245.40
2007 Dodge Ram 3500L6-5.9L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$347.35Shop/Dealer Price$395.86 - $481.39
Show example Dodge Ram 3500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(55)

Rating Summary
52
3
0
0
0
52
3
0
0
0

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Dodge Ram 3500 L6-5.9L Turbo Diesel - Drive Belt Tensioner - Nashville, Tennessee
Friendly, very competent, completed work in timely manner.

Fernando

13 years of experience
31 reviews
Fernando
13 years of experience
Dodge Ram 3500 V8-5.9L - Water Pump - Las Vegas, Nevada
Fernando was very diligent, methodical and organized. He was very calm at freeing up a stuck fan clutch. I would use his services again.

Michael

27 years of experience
478 reviews
Michael
27 years of experience
Dodge Ram 3500 L6-5.9L Turbo Diesel - Brake Pads Replacement (Front, Rear) - Scottsdale, Arizona
Michael Parra arrived on time and was very friendly and professional. Once he went over my vehicle he explained everythig that was going to be done.

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Dodge Ram 3500 L6-5.9L Turbo Diesel - Water Pump - Sandy, Utah
A+ Great Technician knows what it takes to diagnose and fix Cars and Trucks thanks Joseph

Excellent Rating

(55)

Rating Summary
52
3
0
0
0
52
3
0
0
0
Number of Dodge Ram 3500 services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How Long Do Spare Tires Last?
A A spare tire is solely meant for use in an emergency, or as a short term replacement for a flat or damaged tire. It is not meant for everyday or extended use, and tire manufacturers have specific criteria for...
2010 Hyundai Santa Fe vs. 2010 Kia Rondo: Which One Should I Buy?
There are two different classes of vehicle represented here: the 2WD SUV in the Santa Fe and the mid-size station wagon or crossover SUV in the Kia Rondo. The difference between these two classes may seem slight, but the crossover...
P0033 OBD-II Trouble Code: Turbocharger or Supercharger Bypass Valve Control Circuit
P0033 P0033 trouble code definition P0033 is the code for Turbocharger or Supercharger Bypass Valve Control Circuit What the P0033 code means Each manufacturer has a slightly different definition for this code as it is relative to their particular system....

Why does my Nissan 300zx lose power?

Hello, we will be happy to help. I'm curious to know why the guy told you that you needed a new oxygen sensor and fuel pump. I wonder if the oxygen sensors were exhibiting that of lean conditions. If the...

When I am applying brakes at the speed of 60 to 70mph my steering wheel starts to shake?

If you are getting a pulsation in the brakes when applied at high speeds then you most likely have warped front brake rotors or they have hot spots on them that cause the pulsation. Inspect rotors and look for discolored...

After hour or so driving, engine starts to sputter as if not receiving fuel. Stop for 10 mins and it runs fine.

The stalling could be due to a heat induced failure of the ignition coil. Resistance of electrical components increases with temperature and if the coil is the issue that is why the stalling only occurs once the engine is hot....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com