Dodge Ram 1500 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,131)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,131)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Ram 1500 Fuel Injector Replacement is $552 with $457 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Dodge Ram 1500V6-3.9LService typeFuel Injector ReplacementEstimate$1193.39Shop/Dealer Price$1469.24 - $2269.79
2008 Dodge Ram 1500V8-5.7LService typeFuel Injector ReplacementEstimate$1680.04Shop/Dealer Price$2076.72 - $3228.41
2010 Dodge Ram 1500V6-3.7LService typeFuel Injector ReplacementEstimate$1008.19Shop/Dealer Price$1246.51 - $1938.92
2006 Dodge Ram 1500V8-5.7LService typeFuel Injector ReplacementEstimate$1688.76Shop/Dealer Price$2087.57 - $3245.78
2000 Dodge Ram 1500V8-5.2LService typeFuel Injector ReplacementEstimate$1413.15Shop/Dealer Price$1749.98 - $2733.38
2007 Dodge Ram 1500V6-3.7LService typeFuel Injector ReplacementEstimate$1008.19Shop/Dealer Price$1246.51 - $1938.92
2009 Dodge Ram 1500V6-3.7LService typeFuel Injector ReplacementEstimate$1013.19Shop/Dealer Price$1251.37 - $1943.68
1994 Dodge Ram 1500V8-5.9LService typeFuel Injector ReplacementEstimate$2032.91Shop/Dealer Price$2523.44 - $3967.36
Show example Dodge Ram 1500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(1,131)

Rating Summary
1,058
46
6
5
16
1,058
46
6
5
16

Julius

24 years of experience
15 reviews
Julius
24 years of experience
Ram 1500 2006 - Car is shaking or vibrating - Virginia Beach, VA
Great

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
Ram 1500 2007 - Wheel Bearings - Stone Mountain, GA
Adrian showed up 5 minutes before the appointment time, which is awesome. He is very courteous and friendly and got the job done in a timely manner.

Daniel

8 years of experience
37 reviews
Daniel
8 years of experience
Ram 1500 2006 - Battery will not hold a charge - Las Vegas, NV
Daniel was great. Professional, knowledgeable. Diagnosed the issue quickly, was isn't easy, as it was an electrical problem. I highly recommend him and will use him again as needed.

Benji

20 years of experience
206 reviews
Benji
20 years of experience
Ram 1500 2005 - Exhaust Gas Recirculation/EGR Valve - Phoenix, AZ
Awesome quick and knowledgeable

Excellent Rating

(1,131)

Rating Summary
1,058
46
6
5
16
1,058
46
6
5
16
Number of Dodge Ram 1500 services completed
12441+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Be a Professional Race Car Driver
Few Few sports are as full of adrenaline and excitement as car racing. There’s a reason that little kids love their Hot Wheels model cars, and pre-teens love playing racing video games, and teenagers can’t wait to get behind the...
A Car Collector's Guide to Popular Classic Cars
Classic car collectors buy American muscle cars, elegant European cars, and rare Japanese cars. Buy a classic auto to own a piece of car history.
How to Replace a Coolant Vacuum Valve Switch
A vacuum line attaches to the vacuum switch in your car as part of the engine’s heating and cooling system. A faulty switch can break your heater.

Blown head gasket

Hi there. Common signs of a blown head gasket are: overheating, thick white smoke from the tail pipe, milky liquid in the oil cap or radiator cap, or loss of coolant. If you would like to have your head gasket...

Timing belt with water pump replacement? How much it is going to cost?

Billing question sent to CS for the replacement of the Timing Belt and the Water Pump.

My Car Wont Start After Being In An Accident

Anytime a car is in an accident you may have damages to the engine harness, fuel pump or even components that can be damaged when the accident happened. I would recommend having the computer scanned and systems checked by a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com