Dodge Ram 1500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Dodge Ram 1500 Front Crankshaft Seal Replacement is $219 with $23 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Dodge Ram 1500V8-5.9LService typeFront Crankshaft Seal ReplacementEstimate$269.14Shop/Dealer Price$287.22 - $330.10
2002 Dodge Ram 1500V8-4.7LService typeFront Crankshaft Seal ReplacementEstimate$373.98Shop/Dealer Price$394.68 - $448.12
2001 Dodge Ram 1500V8-5.2LService typeFront Crankshaft Seal ReplacementEstimate$256.53Shop/Dealer Price$272.16 - $313.22
2005 Dodge Ram 1500V8-4.7LService typeFront Crankshaft Seal ReplacementEstimate$373.98Shop/Dealer Price$394.73 - $448.21
2003 Dodge Ram 1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$348.88Shop/Dealer Price$379.72 - $459.49
1997 Dodge Ram 1500V8-5.9LService typeFront Crankshaft Seal ReplacementEstimate$249.99Shop/Dealer Price$264.18 - $300.48
1999 Dodge Ram 1500V6-3.9LService typeFront Crankshaft Seal ReplacementEstimate$256.53Shop/Dealer Price$272.18 - $313.26
2009 Dodge Ram 1500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$363.48Shop/Dealer Price$392.00 - $470.03
Show example Dodge Ram 1500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Dodge Ram 1500 Front Crankshaft Seal Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Install a Camshaft
Over Over the years, engines (https://www.yourmechanic.com/article/how-a-modern-engine-works) have evolved in so many ways. Most of the changes or improvements that have been done revolve around creating better performance and fuel economy, without making the engine larger. One of the biggest changes...
The Guide to Legal Car Modifications in Alaska
ARENA Creative / Shutterstock.com Whether you purchased a new car and want to make it a bit more fun and personal or you are just moving to the state of Alaska, you need to know what you’re...
How to Replace a Lost or Stolen Car Title in Louisiana
Likely Likely your car title isn't something you think about or are concerned about on a day to day basis that is until it becomes lost or stolen. Suddenly this small piece of paper becomes quite important. Your car title...

How do I locate the steering fluid reserve in my hyundai creta sx

Hello. Hyundai is one of the vehicle manufactures that is utilizing the electric power steering (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) systems. This means your vehicle may not have a power steering pump, fluid reservoir, or hydraulic assisted steering. They are doing it with gear...

How do I know if the motor is getting power? 2012 Ford Fiesta

Hi there - since it sounds like you have a voltmeter and know what you're doing with it, I am trusting that you have checked the fuses for the windshield wipers, and have made sure the switch was in the...

Charging system indicator light and electric power steering light on, car is a 2008 honda civics hybrid. What does this indicate?

The engine starting battery is very weak or bad and should be tested to see if the engine alternator is charging the battery or the battery is bad and needs replaced. The fact that the alternator light is on is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com