Dodge Nitro Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Dodge Nitro Brake Drum Replacement is $357 with $253 for parts and $104 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2009 Dodge NitroV6-3.7L	Service typeBrake Drum Replacement	Estimate$632.21	Shop/Dealer Price$769.64 - $1157.18
2011 Dodge NitroV6-3.7L	Service typeBrake Drum Replacement	Estimate$619.71	Shop/Dealer Price$758.16 - $1146.47
2010 Dodge NitroV6-3.7L	Service typeBrake Drum Replacement	Estimate$619.71	Shop/Dealer Price$758.16 - $1146.46
2007 Dodge NitroV6-3.7L	Service typeBrake Drum Replacement	Estimate$619.71	Shop/Dealer Price$758.13 - $1146.42
2008 Dodge NitroV6-4.0L	Service typeBrake Drum Replacement	Estimate$610.21	Shop/Dealer Price$747.68 - $1135.24
2008 Dodge NitroV6-3.7L	Service typeBrake Drum Replacement	Estimate$610.21	Shop/Dealer Price$747.66 - $1135.21
2007 Dodge NitroV6-4.0L	Service typeBrake Drum Replacement	Estimate$625.71	Shop/Dealer Price$764.00 - $1152.18
2009 Dodge NitroV6-4.0L	Service typeBrake Drum Replacement	Estimate$615.71	Shop/Dealer Price$753.42 - $1141.17

Show example Dodge Nitro Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(191)

Rating Summary

175

7

4

4

1

175

7

4

4

1

SEE REVIEWS NEAR ME

Charles

34 years of experience

342 reviews

Request Charles

Charles

34 years of experience

Request Charles

by Joe

Dodge Nitro V6-4.0L - Window Motor / Regulator Assembly Replacement (Passenger Side Rear) - Austin, Texas

Charles did a great job. Thanks.

Kevin

33 years of experience

234 reviews

Kevin

33 years of experience

by Sheree

Dodge Nitro V6-4.0L - HopSkipDrive Inspection - Los Angeles, California

Chris

11 years of experience

281 reviews

Chris

11 years of experience

by Christopher

Dodge Nitro V6-3.7L - Alternator - Paradise Valley, Arizona

Chris has serviced both of our vehicles multiple times, and just before a scheduled service, that particular vehicle had broken down with an unrelated issue. Chris graciously changed his plans on the fly and met us at the location where the vehicle was, repaired it, and got us back on the road quickly. He also pointed out a couple of additional things to keep an eye on, and let us know the original service we'd scheduled (on advice of a different mechanic), wasn't actually needed. I will only use Chris going forward if possible; I've been very pleased with his level of customer service on every visit.

Joel

21 years of experience

987 reviews

Joel

21 years of experience

by Ronald

Dodge Nitro V6-4.0L - Smoke from engine or exhaust - Jacksonville, Florida

Very helpful and knowledgable!

Excellent Rating

(191)

Rating Summary

175

7

4

4

1

175

7

4

4

1

SEE REVIEWS NEAR ME

Recent articles & questions

P2258 OBD-II Trouble Code: Secondary Air Injection System Control A Circuit High

P2258 P2258 Code Definition The P2258 trouble code is a generic powertrain code related to fuel and air metering (air injection circuit). This code appears when the engine control module (ECM) detects higher voltage levels than are acceptable in the...

P0357 OBD-II Trouble Code: Ignition Coil G Primary/Secondary Circuit Malfunction

P0357 P0357 code definition When the P0357 code is stored, it means that the PCM has detected one or more ignition coils (https://www.yourmechanic.com/services/ignition-coil-replacement) is faulty to some degree. What the P0357 code means Most vehicles with an OBD-II system utilize...

How to Check Your Power Steering Fluid Level

Power steering fluid pressurizes the power steering system. The type of power steering fluid differs between cars and the level must be maintained.

Headlights turn on by themselves

Hello. There are only two relays for the headlight control. There may be a problem with the headlight switch malfunctioning. Check to see how long you have the auto shut off timer set to, as it could be set for...

Where are the 2 starter safety switches on 1995 Chevy Caprice?

Hi, thanks for writing in. Your car should just have one neutral safety switch that prevents the car from being started when the transmission is not in park. This switch is located down on the left hand (driver's side) of...

Rattling and shaking in front underneath my jeep? Then it rattles when turning feels off balance

The rattling noise is indicative of loose or worn parts, probably in suspension components. The causes of the shaking depend on what speed this is occurring at. If at high speed, shaking could be due to wheel imbalance and/or a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com