Dodge Journey Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Dodge Journey Car Thermostat Replacement is $227 with $87 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Dodge JourneyV6-3.6LService typeCar Thermostat ReplacementEstimate$355.42Shop/Dealer Price$409.13 - $562.14
2010 Dodge JourneyV6-3.5LService typeCar Thermostat ReplacementEstimate$352.39Shop/Dealer Price$405.82 - $562.00
2013 Dodge JourneyV6-3.6LService typeCar Thermostat ReplacementEstimate$349.09Shop/Dealer Price$401.72 - $555.44
2011 Dodge JourneyL4-2.4LService typeCar Thermostat ReplacementEstimate$350.97Shop/Dealer Price$400.61 - $544.92
2015 Dodge JourneyL4-2.4LService typeCar Thermostat ReplacementEstimate$358.63Shop/Dealer Price$411.80 - $563.08
2017 Dodge JourneyV6-3.6LService typeCar Thermostat ReplacementEstimate$353.69Shop/Dealer Price$407.61 - $564.89
2016 Dodge JourneyL4-2.4LService typeCar Thermostat ReplacementEstimate$361.43Shop/Dealer Price$413.70 - $565.88
2014 Dodge JourneyV6-3.6LService typeCar Thermostat ReplacementEstimate$349.09Shop/Dealer Price$401.72 - $555.44
Show example Dodge Journey Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Kyle

20 years of experience
52 reviews
Kyle
20 years of experience
Journey 2015 - Thermostat - Dacula, GA
This was the first time I used My Mechanic. I love it. It is so convenient. I was at work while Kyle was in my driveway working on the car. When I'd check in on him from the outdoor camera, he was always hard at work. He fixed the problem in no time. I will definitely use My Mechanic and Kyle Tangel again.

Jason

13 years of experience
344 reviews
Jason
13 years of experience
Journey 2012 - Thermostat - Flushing, NY
Jason was professional and friendly,he knows whay hes doing and so polite ..

Mike

25 years of experience
79 reviews
Mike
25 years of experience
Journey 2017 - Noise from engine or exhaust - Taylor, MI
Mike was very detailed about what he was doing. After the inspection he went over what he suggested that I can do to alleviate the problem.

Rusty

0 years of experience
532 reviews
Rusty
0 years of experience
Journey 2016 - Oil Change - Arlington, TX
Very friendly and knowledgeable

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Dodge Journey Car Thermostat Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Volkswagen Golf R
The The Volkswagen Golf R has all-wheel drive, two or four door options, and a turbocharged engine for those who want a little extra power. The Golf R is upgraded from the GTI, giving it better handling and more aggressive...
How Do Underbody Car Lights Work?
Your Your car has a number of important lights on it – headlights, turn signals, taillights, brake lights, running lights, and more. However, your options aren’t limited to what was installed by the automaker. You can install aftermarket taillights and...
How Long Does an AC Belt Last?
Your Your AC belt connects the crankshaft of your car’s engine to the air conditioning unit, delivering cool air to you in hot weather, and also working to defrost your windows when the temperature drops. Depending on the type of...

AC not working correctly

Hi. When air comes out of the vents at uneven temperatures, the blend door actuator is usually at fault. Either debris buildup is blocking the door from moving or the electronic actuator on the door itself is malfunctioning. A technician...

Noise in pulley area

Your serpentine belt may be due for a change. Over time the rubber in the belt can get worn or glazed which will cause the belt to squeak. It is also possible that a bearing in one of the drive...

just bought a 2000 Jetta and I lost the one and only key that was with it I need to get it moved before they tow it tomorrow

Hi there. I'm not sure we'd be able to help you here. If the vehicle is locked, you'd need a locksmith to find a way to unlock your vehicle (as that's not something a mechanic would do). Once the vehicle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com