Dodge Dynasty Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(126)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(126)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Dodge Dynasty Valve Cover Gasket Replacement is $170 with $30 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Dodge DynastyV6-3.3LService typeValve Cover Gasket ReplacementEstimate$685.70Shop/Dealer Price$786.83 - $1074.00
1992 Dodge DynastyL4-2.5LService typeValve Cover Gasket ReplacementEstimate$261.95Shop/Dealer Price$285.84 - $352.56
1990 Dodge DynastyV6-3.0LService typeValve Cover Gasket ReplacementEstimate$276.87Shop/Dealer Price$304.52 - $382.45
1993 Dodge DynastyV6-3.3LService typeValve Cover Gasket ReplacementEstimate$638.48Shop/Dealer Price$735.75 - $1020.03
1990 Dodge DynastyL4-2.5LService typeValve Cover Gasket ReplacementEstimate$244.47Shop/Dealer Price$265.79 - $320.74
1991 Dodge DynastyV6-3.3LService typeValve Cover Gasket ReplacementEstimate$667.68Shop/Dealer Price$765.60 - $1050.37
1992 Dodge DynastyV6-3.0LService typeValve Cover Gasket ReplacementEstimate$276.87Shop/Dealer Price$304.54 - $382.48
1993 Dodge DynastyL4-2.5LService typeValve Cover Gasket ReplacementEstimate$247.35Shop/Dealer Price$271.08 - $337.68
Show example Dodge Dynasty Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(126)

Rating Summary
119
3
2
1
1
119
3
2
1
1

Tyrone

12 years of experience
423 reviews
Tyrone
12 years of experience
Dodge Dynasty V6-3.3L - Car is not starting - Accokeek, Maryland
Very professional...walked me through the procedures and made suggestions for future work to be completed...honest with no up-selling...Recommend using again...thumbs up!!

Ned

25 years of experience
52 reviews
Ned
25 years of experience
Dodge Grand Caravan V6-3.3L - Valve Cover Gasket - Chandler, Arizona
NED IS A PROFESSIONAL. I was completely satisfied and will call Ned again. He was very informative in keeping me aware of what he was fixing. Great job.

Joseph

19 years of experience
115 reviews
Joseph
19 years of experience
Dodge Ram 1500 V8-5.2L - Valve Cover Gasket - Pikesville, Maryland
The experience was very different from what I as have been experiencing with other mechanic. It was a good experience. Thank you so much.

Alex

18 years of experience
2 reviews
Alex
18 years of experience
Dodge Caravan V6-3.3L - Valve Cover Gasket - Littleton, Colorado
Alex needs more credit. He did such a super job and his profile for some reason like most I see has little detail. So let me tell you all Alex is a master mechanic who knows what he is doing. Feel assured you will not have just anyone come to your home but a REAL Pro!. I will be getting Alex again and again anytime we need work on our vehicle.

Excellent Rating

(126)

Rating Summary
119
3
2
1
1
119
3
2
1
1
Number of Dodge Valve Cover Gasket Replacement services completed
1386+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Obtain an L1 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide & practice test for L1 Auto Advanced Engine Performance Specialists.
Is It Safe to Drive With the Reduced Power Light On?
When When your Reduced Power Light comes on, that is your vehicle’s way of telling you that there is a problem, either within the charging system, or within the battery itself. It could indicate that your battery is dying, that...
Windshield Laws in New Hampshire
Driving Driving in New Hampshire requires motorists to understand and follow the traffic rules that are applicable throughout the state. In addition to the rules of the road, drivers are also required to make sure that their windshields are in...

How can I determine my tire's size?

Most of us never think about what size our tires are; it's something that usually remains out of mind until getting ready to purchase tires, or thinking about changing tire size. The size of your tires can be easy to...

Temperature gauge keeps spiking and then going back down to normal is that an electrical fan issue or a thermostat issue

Hi There, It sounds like you may have a faulty thermostat or potentially a cooling fan that may not be cycling on and off properly. As you know, the thermostat regulates the flow of the coolant in your car's engine...

Hi, my right side windshield wiper does not work? It’s. 2014 Toyota Prius. Please help! Thank you!

Hi Stephen. Thanks for contacting us today. There are a few reasons why only one wiper is not working. Most of the time, the wiper arm is either stripped on the motor post or the post arm connection to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com