Dodge D200 Series Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Dodge D200 Series Wheel Bearings Replacement is $253 with $158 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Dodge D200 SeriesL6-3.8LService typeWheel Bearings - Driver Side Front ReplacementEstimate$600.93Shop/Dealer Price$732.42 - $1104.37
1963 Dodge D200 SeriesL6-3.7LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$580.93Shop/Dealer Price$712.43 - $1084.40
1966 Dodge D200 SeriesL6-3.7LService typeWheel Bearings - Driver Side Front ReplacementEstimate$580.93Shop/Dealer Price$712.43 - $1084.40
1965 Dodge D200 SeriesL6-3.7LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$458.61Shop/Dealer Price$552.63 - $800.96
1966 Dodge D200 SeriesL6-3.7LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$458.61Shop/Dealer Price$552.69 - $801.06
1967 Dodge D200 SeriesV8-6.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$580.93Shop/Dealer Price$712.43 - $1084.40
1962 Dodge D200 SeriesV8-5.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$585.93Shop/Dealer Price$717.30 - $1089.16
1962 Dodge D200 SeriesL6-3.7LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$466.11Shop/Dealer Price$560.52 - $809.14
Show example Dodge D200 Series Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(80)

Rating Summary
76
1
0
0
3
76
1
0
0
3

Adrian

14 years of experience
26 reviews
Adrian
14 years of experience
Dodge Ram 1500 V8-5.7L - Wheel Bearings Replacement (Passenger Side Front) - Stone Mountain, Georgia
Adrian showed up 5 minutes before the appointment time, which is awesome. He is very courteous and friendly and got the job done in a timely manner.

Victor

11 years of experience
211 reviews
Victor
11 years of experience
Dodge Ram 2500 L6-5.9L Turbo Diesel - Wheel Bearings Replacement (Passenger Side Front) - Chesapeake, Virginia
Knowledgeable and polite

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Dodge Aspen L6-3.7L - Wheel Bearings Replacement (Driver Side Front) - Sacramento, California
Jeff is the man! I had called around town to get my car up and running but no one wanted to work on a 1978 Dodge Aspen Wagon. Jeff went above and beyond. Jeff...I don't have the words.

Albert

13 years of experience
27 reviews
Albert
13 years of experience
Dodge Ram 1500 V8-5.7L - Wheel Bearings Replacement (Driver Side Front) - Burlington, New Jersey

Excellent Rating

(80)

Rating Summary
76
1
0
0
3
76
1
0
0
3
Number of Dodge Wheel Bearings Replacement services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Do All Vehicles Have an OBD System?
Today’s Today’s cars are equipped with sophisticated technology. The OBD system (on-board diagnostics) is actually advanced enough to monitor several critical systems on your vehicle and warn you when something starts to go wrong, which can prevent serious damage in...
How to Turn Off the Reverse Beep in a Prius
The The Toyota Prius is designed to shut off the engine when stopped as an energy-conserving measure. When the accelerator is depressed, it starts to back up, so you can go about your business on the road. When your Prius...
P0658 OBD-II Trouble Code: Actuator Supply Voltage “A” Circuit Low
P0658 means that there is a fault in the actuator supply voltage due to Shorted or open wires or damaged connectors in the PCM, or a control module.

Check Transmission Light coming on

Hi. The "Check Transmission" light indicates that a fault code is present in the transmission computer. To correct this, the fault codes need to be read in order to determine the issue. Fault corrections could be as simple as a...

Transmission does not shift properly

This may be a result of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or potentially a faulty transmission control module. A faulty transmission control module may cause a delay in acceleration or erratic shifting of gears. The transmission control module has various sensors...

Transmission failsafe program comes on dash 2001 BMW X5

Hi there - the first task is to have the transmission fluid level (https://www.yourmechanic.com/article/does-an-automatic-transmission-have-a-clutch) checked. This will require technical assistance and a lift, since there is no dipstick on this model, and the fluid level "port" is underneath. Correct fluid...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com