Dodge D200 Pickup Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(380)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(380)

Car Battery Replacement Estimate for Dodge D200 Pickup

Dodge D200 Pickup Car Battery Replacement costs $249 on average.

CarServiceEstimateShop/Dealer Price
1971 Dodge D200 PickupV8-6.6LService typeCar Battery ReplacementEstimate$409.99Shop/Dealer Price$503.99 - $754.49
1971 Dodge D200 PickupV8-5.9LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1973 Dodge D200 PickupL6-3.7LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1973 Dodge D200 PickupV8-5.2LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.39 - $741.68
1972 Dodge D200 PickupV8-6.6LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.42 - $741.75
1974 Dodge D200 PickupV8-7.2LService typeCar Battery ReplacementEstimate$399.99Shop/Dealer Price$492.41 - $741.72
1970 Dodge D200 PickupL6-3.7LService typeCar Battery ReplacementEstimate$404.99Shop/Dealer Price$497.27 - $746.48
1968 Dodge D200 PickupL6-3.7LService typeCar Battery ReplacementEstimate$404.99Shop/Dealer Price$497.64 - $747.14
Show example Dodge D200 Pickup Car Battery Replacement prices

Car Battery Replacement Service

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(380)

Rating Summary
364
10
2
2
2
364
10
2
2
2

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Dodge D200 Pickup V8-5.2L - Car is not starting - Vacaville, California

Keith

30 years of experience
76 reviews
Keith
30 years of experience
Dodge D200 Pickup V8-5.2L - Oil Pan Replacement - Peoria, Arizona
arrived on time and got the job done with no worries.

Attila

19 years of experience
814 reviews
Attila
19 years of experience
Dodge Avenger L4-2.4L - Battery - Jersey City, New Jersey
He came for battery replacement. He was very friendly and quick. I am highly satisfied with the service.

Peter

12 years of experience
119 reviews
Peter
12 years of experience
Dodge Charger V6-3.6L - Battery - Livermore, California
He is on time snd fast

Excellent Rating

(380)

Rating Summary
364
10
2
2
2
364
10
2
2
2
Number of Dodge Battery Replacement services completed
4180+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Replace a Wheel Seal
Wheel seals are part of the wheel bearing system and keep dirt and debris away from these bearings. Replace wheel seals if grease leaks from bearings.
How to Replace a Transfer Case Output Shaft Seal
A transfer case output shaft moves torque from the powertrain to the rear wheels of a 4WD, using the transfer case output shaft seal to stay in place.
P3493 OBD-II Trouble Code: Cylinder 12 Exhaust Valve Control Malfunction
P3493 means there is an issue with cylinder 12 which can cause the variable valve timing system in the vehicle to disable and poor acceleration.

My master light came on

Replace throttle body 2010 ford fusion hybrid

Prior to replacing the throttle body, you should go through the Ford diagnostic procedure in the Factory Service Manual for this part to ensure that you do not replace a perfectly good part. The removal procedure is to first remove...

There's a bolt broken off the rear upper control arm the cross member

It depends. If only a bolt needs to be replaced, the price "sounds" high but even that response is speculative because there might be a lot of disassembly work to get to the bolt and then, of course the wheel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com