Dodge D100 Pickup Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(613)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(613)

Brake Pad Replacement Estimate for Dodge D100 Pickup

Dodge D100 Pickup Brake Pad Replacement costs $178 on average.

CarServiceEstimateShop/Dealer Price
1973 Dodge D100 PickupL6-3.2LService typeBrake Pads - Rear ReplacementEstimate$255.31Shop/Dealer Price$310.64 - $445.13
1971 Dodge D100 PickupL6-3.7LService typeBrake Pads - Front ReplacementEstimate$365.09Shop/Dealer Price$448.78 - $671.92
1969 Dodge D100 PickupV8-5.2LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1969 Dodge D100 PickupV8-6.3LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.04 - $432.32
1973 Dodge D100 PickupV8-5.9LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.07 - $432.39
1974 Dodge D100 PickupV8-6.6LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1974 Dodge D100 PickupL6-3.7LService typeBrake Pads - Rear ReplacementEstimate$250.31Shop/Dealer Price$303.92 - $437.12
1973 Dodge D100 PickupV8-5.2LService typeBrake Pads - Rear ReplacementEstimate$250.31Shop/Dealer Price$304.29 - $437.78
Show example Dodge D100 Pickup Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(613)

Rating Summary
585
19
3
1
5
585
19
3
1
5

Choeun

15 years of experience
181 reviews
Choeun
15 years of experience
Dodge D100 Pickup V8-5.2L - When I slow down and stop the car, engine shuts off - Lodi, California
He was well experience about my truck, tell me what to do about it and what parts he recommended

Chris

11 years of experience
82 reviews
Chris
11 years of experience
Dodge D100 Pickup * - Electrical components are not working - South River, New Jersey
Had my truck at my local garage and they could not fins the problem Chris found it

Rusty

23 years of experience
474 reviews
Rusty
23 years of experience
Dodge D100 Pickup L6-3.7L - Carburetor - Arlington, Texas
This is an older vehicle which requires some thinking and innovation. Rusty had no problem adapting to the situation!

Robert

40 years of experience
37 reviews
Robert
40 years of experience
Dodge Durango V8-5.7L - Brake Pads Replacement (Rear) - Scottsdale, Arizona
Robert showed up on time and he had everything done and ready in only a couple hours! The car runs great now!

Excellent Rating

(613)

Rating Summary
585
19
3
1
5
585
19
3
1
5
Number of Dodge Brake Pads Replacement services completed
6743+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Check and Add Fluid to an Automatic Transmission Car
Checking and keeping your transmission filled with a good level of fluid will help give you a seamless experience when driving.
P0582 OBD-II Trouble Code: Cruise Control Vacuum Control Circuit/Open
P0582 P0582 OBD-II Trouble Code: Cruise Control Vacuum Control Circuit/Open P0582 code definition The P0582 code indicates that there has been a malfunction detected in the cruise control vacuum control circuit by the car’s computer. What the P0582 code...
How to Replace Shock Absorbers
Your Your shocks, or shock absorbers, are a pivotal part of your vehicle's suspension. As suggested by their name, their purpose is not to absorb shock. They do so much more, and are invaluable to your vehicle, as they assist...

My check engine light was on in my 2015 jeep [compass](/topics-compass/). I used the key to get the obdii codes without a reader. I git 3 quick beeps followed by 3 quick beeps... what is the issue? The jeep appears to be operating normally other than the light.

Shaking

Hi There, Depending on what speed the shaking happens and whether or not it happens when pressing the brake pedal, this may be a result of suspension components failing or possibly brakes that need to be replaced. If the shaking...

Electrical issues with Chevy Cobalt SS 07

Hi there. It appears you have a serious electrical mess on your hands. In most cases, instead of trying to trace an issue where there are "customized alterations", it may be a better idea to completely rewire the vehicle's ignition...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com