Dodge Custom Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(613)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(613)

Brake Pad Replacement Estimate for Dodge Custom

Dodge Custom Brake Pad Replacement costs $172 on average.

CarServiceEstimateShop/Dealer Price
1960 Dodge CustomV8-5.9LService typeBrake Pads - Front ReplacementEstimate$255.31Shop/Dealer Price$310.64 - $445.13
1960 Dodge CustomV8-5.9LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1961 Dodge CustomV8-6.7LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1961 Dodge CustomV8-6.7LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.04 - $432.32
1961 Dodge CustomV8-5.9LService typeBrake Pads - Rear ReplacementEstimate$245.31Shop/Dealer Price$299.07 - $432.39
1961 Dodge CustomV8-5.9LService typeBrake Pads - Front ReplacementEstimate$245.31Shop/Dealer Price$299.06 - $432.36
1960 Dodge CustomV8-6.3LService typeBrake Pads - Rear ReplacementEstimate$250.31Shop/Dealer Price$303.92 - $437.12
1961 Dodge CustomV8-6.3LService typeBrake Pads - Front ReplacementEstimate$250.31Shop/Dealer Price$304.29 - $437.78
Show example Dodge Custom Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(613)

Rating Summary
585
19
3
1
5
585
19
3
1
5

Xavier

16 years of experience
101 reviews
Xavier
16 years of experience
Dodge Ram 1500 V8-5.7L - Brake Pads Replacement (Front) - Jacksonville, Florida
Very informative! Xavier explained the issue, how to prevent it, and answered all of my questions.

Jason

15 years of experience
344 reviews
Jason
15 years of experience
Dodge Dakota V6-3.7L - Brake Pads Replacement (Front) - Wantagh, New York
This is the 2nd time I’ve used Jason’s services and just like the 1st time it was awesome dealing with him. Honest, professional and a great worker. It’s comforting to be able to trust a mechanic

Oreste

14 years of experience
149 reviews
Oreste
14 years of experience
Dodge Avenger L4-2.4L - Brake Pads Replacement (Front) - Miami, Florida
Orestes is very professional. He explained what was done to my vehicle and suggested upcoming maintenance needed. Great person

Juan

12 years of experience
55 reviews
Juan
12 years of experience
Dodge Challenger V8-5.7L - Brake Pads Replacement (Front, Rear) - Suisun City, California
Juan was better than I could have hoped for. Super professional and clean (mask on at all times). Personable and helpful. Even explained to me some about the work he did and other work that could possibly be next for my car. And he was done sooner than expected! Would 100% recommend him to friends and family in the future. Thank you so much for the exceptional service!

Excellent Rating

(613)

Rating Summary
585
19
3
1
5
585
19
3
1
5
Number of Dodge Brake Pads Replacement services completed
6743+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Replace a Rear Window Transmission
The rear window has a transmission that fails if the window jerks, stops halfway, or does not move at all. A door light may also illuminate.
P0313 OBD-II Trouble Code: Misfire Detected with Low Fuel Level
P0313 means a misfire has been detected in an engine cylinder with a low fuel reading, likely due to an insufficient fuel level or bad ignition coil.
B1932 OBD-II Trouble Code: Air Bag Driver Circuit Open
B1932 means there is an error with the driver side's airbag circuit, most likely due to faulty wiring or a defect in the airbag deployment system.

hi i recently bought a rebuilt transsmison for my 2000 chevy silverado 4x4 5.3. i can get my truck to shift right and im geting to

You should have the computer scanned to get the failure codes and have them diagnosed first and then you may know the cause of transmission problems and check engine light.

I have a 2006 Suzuki Forenza and recently just got the engine replaced. after driving it for a while yesterday the malfunction ind

Without knowing what caused the check engine light to come on or the codes stored it would not be able to be determined if engine damage can occur if you continue to drive it. I would recommend having the codes...

My truck isn't idling right and is burging a lot of gas

Code 12 will always flash when checking for codes. With the engine off, there is no ignition pulse so Code 12 is normal to see. Code 34 has to do with the MAP sensor. Manifold Absolute Pressure. It's basically a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com