Dodge Coronet Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Dodge Coronet Wheel Bearings Replacement is $289 with $194 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1965 Dodge CoronetV8-6.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$503.73Shop/Dealer Price$610.92 - $909.97
1975 Dodge CoronetV8-5.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$484.17Shop/Dealer Price$591.48 - $890.88
1965 Dodge CoronetV8-5.9LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$483.73Shop/Dealer Price$590.93 - $890.00
1967 Dodge CoronetL6-3.7LService typeWheel Bearings - Driver Side Front ReplacementEstimate$483.73Shop/Dealer Price$590.91 - $889.96
1971 Dodge CoronetV8-6.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$483.73Shop/Dealer Price$590.95 - $890.03
1968 Dodge CoronetV8-7.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$483.73Shop/Dealer Price$590.93 - $890.00
1974 Dodge CoronetV8-5.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$489.17Shop/Dealer Price$596.35 - $895.64
1971 Dodge CoronetV8-7.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$488.73Shop/Dealer Price$596.17 - $895.42
Show example Dodge Coronet Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(80)

Rating Summary
76
1
0
0
3
76
1
0
0
3

Richard

21 years of experience
237 reviews
Richard
21 years of experience
Dodge Coronet V8-7.0L - Starter - Naples, Florida
Very professional and knowledgeable.

Francisco

18 years of experience
65 reviews
Francisco
18 years of experience
Dodge Ram 1500 V6-3.7L - Wheel Bearings Replacement (Driver Side Front) - Wylie, Texas
Francisco was excellent and speedy with the repair.

Tyree

15 years of experience
14 reviews
Tyree
15 years of experience
Dodge Challenger V8-5.7L - Wheel Bearings Replacement (Passenger Side Front) - Fort Myers, Florida
On time, fast, knowledgeable and very friendly.

Keith

26 years of experience
231 reviews
Keith
26 years of experience
Dodge Ram 1500 V8-4.7L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Carrollton, Texas
Excellent work

Excellent Rating

(80)

Rating Summary
76
1
0
0
3
76
1
0
0
3
Number of Dodge Wheel Bearings Replacement services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How to Prepare for the Delaware Driver’s Written Test
It’s It’s almost time to learn how to drive, but before you can get on the road and practice, you need to have a driver’s permit. In order to get the permit, you need to take a written exam at...
P2666 OBD-II Trouble Code: Fuel Shutoff Valve B Control Circuit Low
P2666 means there is a problem with the fuel shut off valve usually due to any multitude of electrical issues and/or problems.
Understanding the Acura Maintenance Minder Codes and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Acura Maintenance Minder codes indicate when and what service your car needs.

The oil pan gasket is protruding from the front of the oil pan. It sticks out 1". Has this happened to other B3000's?

Hi there. Sometimes when certain gaskets are tightened down, they can stretch out and extend past their normal boundaries. As long as the oil pan is not leaking any oil, I would not consider this to be an issue. If...

Back wheels bow out at bottom

Front or rear wheels can bow out for a number of reasons. In alignment terms, we call this negative camber. Camber is the angle of the wheels when looking straight at them from the front or rear. When the tops...

I have a 2007 infinity g35 an when i start the car the rpm is at 2 then it will go down to normal an putting it into reverse is no

This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, making turns (which makes use of the power steering pressure switch) turning on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com