Dodge Conquest Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Dodge Conquest Fuel Injector Replacement is $673 with $578 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Dodge ConquestL4-2.6L TurboService typeFuel Injector ReplacementEstimate$1270.89Shop/Dealer Price$1569.87 - $2444.29
1984 Dodge ConquestL4-2.6L TurboService typeFuel Injector ReplacementEstimate$1250.89Shop/Dealer Price$1549.88 - $2424.32
1986 Dodge ConquestL4-2.6L TurboService typeFuel Injector ReplacementEstimate$1250.89Shop/Dealer Price$1549.88 - $2424.32
Show example Dodge Conquest Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(23)

Rating Summary
22
0
1
0
0
22
0
1
0
0

Tyler

27 years of experience
178 reviews
Tyler
27 years of experience
Dodge Charger V6-2.7L - Fuel Injector - Houston, Texas
great mechanic

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Dodge Avenger V6-3.5L - Fuel Injector - Norfolk, Virginia
Matt is great! Super knowledgeable and helpful. Not pushy at all and gives you his honest advice on what'd he'd do for his own car. Definitely recommend and will be using him again!

Dan

39 years of experience
975 reviews
Dan
39 years of experience
Dodge Durango V8-4.7L - Fuel Injector - Gainesville, Georgia
Dan is the man, knowledgeable, courteous, professional will only use Dan for all my cars

Andrew

15 years of experience
499 reviews
Andrew
15 years of experience
Dodge Nitro V6-3.7L - Fuel Injector - Vancouver, Washington
This mechanic is very nice, professional, and honest. Was a great first experience!

Excellent Rating

(23)

Rating Summary
22
0
1
0
0
22
0
1
0
0
Number of Dodge Fuel Injector Replacement services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Connecticut
All All Connecticut drivers are required to carry automotive insurance, or “financial responsibility,” in order to operate a vehicle legally and maintain vehicle registration. The current laws state that you must retain three types of insurance in order to drive...
Child Seat Safety Laws in South Carolina
In In South Carolina, children are far more likely to die in motor vehicle collisions than from any other cause. Car accidents are also the leading cause of injuries in children. Accordingly, there are laws that are based in common...
How to Modify the Alpine Navigation in an Acura or Honda
Modifying Modifying the original equipment manufacturer (OEM) navigation system of your Acura or Honda vehicle with aftermarket software is an easy way to add additional customization features to the already-installed system. Using a simple third-party computer program and a DVD-ROM...

My vehicle is mixing water and oil

Because you have a manual transmission, the mix of oil and coolant can be caused by a leaking intake manifold gasket, a blown head gasket or a cracked cylinder head. The intake manifold would need to be removed and inspected...

Truck clicks one time but wont turn over.

Hi there. If the starter was replaced, first check the battery cables (https://www.yourmechanic.com/services/service-battery-cables) to the starter and make sure that they are tight. If the cables are tight, then the issue could be that the clutch may have broke causing...

Car won't stop making noises and jerking .

The rough running circumstance you are describing is often a consequence of multiple faults in ignition, fuel, and air induction, not to mention the possibility of low or uneven cylinder compression. Just as a for instance, you could have uneven...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com