Dodge B3500 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Dodge B3500 Car Thermostat Replacement is $222 with $82 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Dodge B3500V8-5.9LService typeCar Thermostat ReplacementEstimate$324.30Shop/Dealer Price$370.23 - $499.90
1997 Dodge B3500V8-5.2LService typeCar Thermostat ReplacementEstimate$309.39Shop/Dealer Price$352.07 - $476.00
1995 Dodge B3500V8-5.2LService typeCar Thermostat ReplacementEstimate$315.29Shop/Dealer Price$359.47 - $487.84
1998 Dodge B3500V8-5.9LService typeCar Thermostat ReplacementEstimate$309.39Shop/Dealer Price$352.10 - $476.04
1996 Dodge B3500V8-5.9LService typeCar Thermostat ReplacementEstimate$315.29Shop/Dealer Price$360.95 - $490.42
1997 Dodge B3500V8-5.9LService typeCar Thermostat ReplacementEstimate$309.39Shop/Dealer Price$352.24 - $476.29
1998 Dodge B3500V8-5.2LService typeCar Thermostat ReplacementEstimate$309.39Shop/Dealer Price$352.11 - $476.07
1996 Dodge B3500V8-5.2LService typeCar Thermostat ReplacementEstimate$315.29Shop/Dealer Price$359.47 - $487.84
Show example Dodge B3500 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Pardeep

16 years of experience
1060 reviews
Pardeep
16 years of experience
B3500 1998 - Cooling System Flush - Campbell, CA
Pardeep did an excellent job installing a new water pump and bypass hose as well as an oil and filter change, on my 98 Dodge Utility Van. I recommend him highly!

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Dodge B3500 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Infiniti EX
If If you’re in search of sport meets practicality, the EX may just be your perfect match. With the sedan-like driving of its G37 sibling combined with utility functionality and plenty of power under the hood, this is one SUV...
How to Take Part in a Seized Car Auction
Buying Buying a car can put a strain on any budget. Luckily, you can choose between a couple of methods when searching for a vehicle. One of those options, buying a seized car, can save you money while giving you...
A Buyer’s Guide to the 2012 Infiniti G
The The 2012 Infiniti G is a sporty luxury sedan that has the looks, the power and speed, and the price that’s right for many buyers. It offers great handling, and aesthetics that will turn heads. Key Features The vehicle...

Loose steering causing engine to stop

Hello. If you are referring to the steering lock pin that locks the steering wheel in place when the key is turned off, then this can cause the engine to stall as it can also affect the ignition switch. If...

Starting disabled service throttle. That's all it says, it wont start, what do I do ?

From what you've described, it sounds like you have a problem with your electronic throttle control system. Make sure your battery (https://www.yourmechanic.com/services/service-battery-cables) is good, if it is you may need to replace your throttle control valve to fix this issue...

Brand new fuel pump reading two full or two empty

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com