Chrysler Pacifica Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(336)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(336)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Chrysler Pacifica Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chrysler PacificaV6-3.5LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Chrysler PacificaV6-4.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Chrysler PacificaV6-4.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Chrysler PacificaV6-3.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Chrysler PacificaV6-3.5LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Chrysler PacificaV6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Chrysler PacificaV6-3.6L HybridService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2007 Chrysler PacificaV6-3.8LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chrysler Pacifica Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(336)

Rating Summary
304
18
3
3
8
304
18
3
3
8

Wayne

31 years of experience
102 reviews
Wayne
31 years of experience
Chrysler Pacifica V6-3.8L - Starter - Philadelphia, Pennsylvania
Wayne was on time and prepared to work. He demonstrated professionalism and knowledge. I am happy with my repair and will definitely request again should I need work in the future.

Chris

22 years of experience
2247 reviews
Chris
22 years of experience
Chrysler Pacifica V6-3.5L - Idler Pulley - Huntington Beach, California
He was eaarlier than expected, got the job done in a timely,but efficient manner.He also did a 50 point inspection that I didn't expect at all...Great!

Charles

11 years of experience
69 reviews
Charles
11 years of experience
Chrysler Pacifica V6-3.6L - Oil Change - Hollywood, Florida
Charles was on time, answered all my questions, was knowledgeable, and clean. Great service.

Anthony

33 years of experience
79 reviews
Anthony
33 years of experience
Chrysler Pacifica V6-3.5L - Alternator - Carrollton, Georgia
fixed everything requested, did it all in less than an hour.

Excellent Rating

(336)

Rating Summary
304
18
3
3
8
304
18
3
3
8
Number of Chrysler Pacifica services completed
3696+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Idler Pulley
Common signs include a damaged bearing or pulley, squealing from the engine area, and visibly worn pulleys.
How Long Does a Throttle/Accelerator Pedal Position Sensor Last?
The The throttle/accelerator pedal position sensor detects the position of the accelerator pedal. This information is then transmitted to the vehicle’s computer - the engine control module (ECM). From there, the data is then sent from the computer to the...
P2257 OBD-II Trouble Code: Secondary Air Injection System Control A Circuit Low
P2257 P2257 code definition Secondary Air Injection System Control A Circuit Low What the P2257 code means P2257 is an OBD-II generic code. The Engine Control Module (ECM) monitors the secondary air injection system control valve A circuit, when the...

Car stuck in 4th gear.

The two codes point to two different problems. The code P0501 indicates a possible problem with the vehicle speed sensor. The code P0753 point to a possible problem to shift solenoid A in the transmission. Both of these problems could...

Car will not start - 2006 Volvo S40

Hi and thanks for your question. There are three things that could cause this situation. Your vehicle could have a failed starter, a failed fuel pressure regulator, or a break in the wire from the ignition switch to the starter...

Installing an aftermarket [starter](/topics-starter-ford/) I accidentally cut an obd wire, can I splice a new wire in to fix it?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com