Chrysler LHS Power Steering Pump Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Chrysler LHS Power Steering Pump Replacement is $353 with $115 for parts and $238 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1994 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$493.02	Shop/Dealer Price$556.52 - $733.25
1995 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$538.50	Shop/Dealer Price$614.20 - $834.28
2000 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$499.66	Shop/Dealer Price$565.69 - $756.67
1997 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$538.50	Shop/Dealer Price$614.24 - $834.35
2001 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$543.46	Shop/Dealer Price$612.99 - $806.60
1996 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$538.50	Shop/Dealer Price$614.48 - $834.77
1999 Chrysler LHSV6-3.5L	Service typePower Steering Pump Replacement	Estimate$499.66	Shop/Dealer Price$565.72 - $756.72

Show example Chrysler LHS Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
The threaded connectors to the pump inlet and outlet are loosened and removed.
Any mounting bolts and brackets are removed so the pump can be removed.
If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(30)

Rating Summary

27

1

1

0

1

27

1

1

0

1

SEE REVIEWS NEAR ME

Christopher

17 years of experience

19 reviews

Request Christopher

Christopher

17 years of experience

Request Christopher

by Madison

Chrysler LHS V6-3.5L - Battery - Orangevale, California

Pros: 1. Quickly assessed the symptom was a dysfunctional battery, not a dead starter, as I had assumed. 2. When I advised him I had ongoing challenges with the battery draining, causing me to have to put the battery charger on it for 48 hours to recharge, he went to battery, looked at its specifications, and advised me, the auto repair shop that replaced the battery a few years ago, had installed a battery model that was woefully inadequate to handle the electric load for my luxury sedan. 3. Personable, polite, and courteous. 4. Patient, answering my questions, helping me understand what he was doing to resolve the issue. 5. Saved me over $100 on the service bill. Cons: 1. Not equipped with cover to place over vehicle to prevent marring the car finish. I put thick blankets on the car. This is not a huge issue. I've noticed other in-home mechanics also are not equipped with the item. Just the car repair shops. So, if you have anyone come to your garage to work on your car, you should be pro-active and put a cover on the interior carpet and thick (quilt type) cloth for the car area being worked on.

Kevin

25 years of experience

651 reviews

Kevin

25 years of experience

by Julian

Chrysler LHS V6-3.5L - Battery Terminal Ends - Atlanta, Georgia

awesome

Tabitha

18 years of experience

379 reviews

Request Tabitha

Tabitha

18 years of experience

Request Tabitha

by Timothy

Chrysler LHS V6-3.5L - Starter - San Diego, California

Change starter. Started right up. Went out start my car 30 minuets later., Click. Click, No Start. Called Yourmechhanic, no help, they said they would call back. Still waiting. not happy.

Joshua

28 years of experience

709 reviews

Joshua

28 years of experience

by Susan

Chrysler LHS V6-3.5L - Car AC Repair - Oakland, California

Joshua was very personable, knowledgeable, and professional. I'm very happy with the service he provided.

Excellent Rating

(30)

Rating Summary

27

1

1

0

1

27

1

1

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

Symptoms of a Bad or Failing Exhaust Gas Recirculation (EGR) Valve

Common signs include engine performance issues like decreased power and acceleration, rough idle, and the Check Engine Light coming on.

How Long Does an Automatic Timing Advance Unit Last?

The The automatic timing advance unit is a component in vehicles with diesel engines. Of course gas and diesel engines both work on the internal combustion principle, but they are quite different, and require different means of controlling the flow...

P0515 OBD-II Trouble Code: Battery Temperature Sensor Circuit

P0515 trouble code means there is an issue with the battery temperature sensor circuit often caused by battery corrosion or engine overheating.

Will my rims on my 1991 Toyota Corolla fit on my 1989 Honda Accord

Hi there - no, your Honda rims (OEM at least) will not fit on your Toyota Corolla. Even though the bolt pattern is the same, the center bore on your Toyota rims is 54.1mm, but your Honda center bore is...

Hi I have a 2002 Holden Frontera with an ABS light on. My mechanic said the code C0276 comes up. Can i get some advice on how to resolve this issue. Thanks

I was just wondering if I need to program an electric ERG valve if I replace my old one.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com