Chrysler LeBaron Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a Chrysler LeBaron Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Chrysler LeBaronL4-2.5LService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1979 Chrysler LeBaronL6-3.7LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Chrysler LeBaronV6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Chrysler LeBaronV6-3.0LService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1989 Chrysler LeBaronL4-2.5L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1990 Chrysler LeBaronL4-2.5L TurboService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1979 Chrysler LeBaronV8-5.9LService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Chrysler LeBaronL4-2.2LService typeCar idle is rough InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chrysler LeBaron Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(15)

Rating Summary
13
1
0
0
1
13
1
0
0
1

Kevin

33 years of experience
234 reviews
Kevin
33 years of experience
Chrysler LeBaron L4-2.6L - Brake Pads Replacement (Front, Rear) - Los Angeles, California
Kevin is amazing. Very knowledgeable and friendly and goes above and beyond to get your car in tip-top shape. I highly recommend him!

Anderson

27 years of experience
91 reviews
Anderson
27 years of experience
Chrysler LeBaron L4-2.5L - Timing Belt - Rockville Centre, New York
Anderson arrived on time and with a great attitude. Very patient and answered all my questions, Great job fixing my old 1988 Chrysler Lebaron's timing belt and water pump.

Phillip

17 years of experience
85 reviews
Phillip
17 years of experience
Chrysler LeBaron V6-3.0L - Oil Change - San Antonio, Texas
Was very helpful and prompt. Went the extra mile to reconfigure some starter wiring that was messed up and I hadn't gotten to. An overall quick and easy experience and I would recommend Phillip to anybody.

Jonathan

35 years of experience
486 reviews
Jonathan
35 years of experience
Chrysler LeBaron V6-3.0L - Timing Belt - Brooksville, Florida
Jonathon, Is a Nice Guy with Patience and did a Great Job! Showed up on time and got the repairs done, I will only book him again in the Future, after I had an issue with another Business locally, I decided to give your mechanic a try, I am glad I did.

Excellent Rating

(15)

Rating Summary
13
1
0
0
1
13
1
0
0
1
Number of Chrysler LeBaron services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Vehicle Covers
Whether Whether you are driving a car, truck or SUV, a vehicle cover is critical to ensure that your vehicle is safe from the elements and maintains that just-off-the-lot look. Leaving your car or truck out in the rain can...
P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
How to Drive Your Vehicle Through a Flood
It can be dangerous to drive a car through water. Approach the flood in a low gear and find a safer route if the water is too deep to drive through.

Rattling noise under vehicle

There are many things that can cause a rattle under your vehicle. If the rattling occurs when driving and seems to happen more when accelerating or decelerating then it is more than likely a loose exhaust heat shield. A mechanic...

Shifter won't move - stays stuck on park.What could be wrong with it? 2004 Dodge Durango

Hi - having changed the brake light switch (most common source of this problem) and confirmed that brake lights are now working (if not, check brake light wiring - switch does more than brake lights), the shift interlock solenoid (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-shift-interlock-solenoid)...

Engine swap on a ford Sierra mk 1 cost??

Unfortunately, Your Mechanic does not perform engine swaps or replacements. Your best source of information for that may be internet forums that focus on the SIerra. You mat find someone on one of those forums that may have done what...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com