Chrysler Grand Voyager Loud noise when using the clutch Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Loud noise when using the clutch Inspection Service

How much does a Loud noise when using the clutch Inspection cost?

On average, the cost for a Chrysler Grand Voyager Loud noise when using the clutch Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chrysler Grand VoyagerV6-3.3LService typeLoud noise when using the clutch InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2000 Chrysler Grand VoyagerV6-3.0LService typeLoud noise when using the clutch InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chrysler Grand Voyager Loud noise when using the clutch Inspection prices

Driving a car with a manual transmission can be a lot of fun. It’s perhaps the most engaged type of driving – connecting you with the car in a very visceral way. However, drivers with manual transmissions face problems that rarely occur for drivers who have an automatic. Clutch wear and tear is one of those (all clutches wear out, and automatic transmissions use them too, but the incidence of wear is less). If you’ve noticed a loud noise when using the clutch, there’s definitely a problem, but it could be one of several different things.

How this system works:

While manual transmissions have become more advanced in the last couple of decades, they’re still simpler to understand than automatics. One of the most easily understood aspects here is how the clutch works. It’s all about friction – and it’s pretty similar to the way your brakes work, too.

When you press the clutch pedal, it engages the clutch to allow you to shift gears. The clutch presses against the flywheel, and the friction material on the clutch stops the transmission from spinning. When you let off the pedal, the clutch disengages, and the transmission is free to spin with the engine.

Operating the clutch requires having working bearings – this applies to both engaging (pressing the pedal in) and disengaging (letting off on the pedal). There are several bearings here as well, including the throw out bearing and pilot bearing.

Common reasons for this to happen:

  • Worn Throw Out Bearing: If you notice the noise from your clutch when you release the pedal, chances are good that the throw out bearing is failing and will need to be replaced.

  • Worn Pilot Bearing: If you notice noise when you press the clutch pedal in, the most likely culprit is the pilot bearing, which will need to be replaced.

  • Worn Release Bearing: Another possible cause of noise when pressing the clutch pedal in is the release bearing. If it’s making noise, then the bearing is failing and will need to be replaced.

  • Worn Clutch: It’s also possible that the clutch itself is worn and will need to be replaced. These are high wear components and need to be replaced on a regular basis. However, the frequency of replacement will depend on your driving style and habits. When replacing the clutch, it may also be necessary to have the flywheel resurfaced.

  • Worn Input Bearing: If the noise happens when the car is in neutral and you are not using the clutch at all, the most likely cause is the input bearing, which is located inside the transmission.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch and transmission operation and verify the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

One of our mechanics will inspect your clutch operation in order to verify the noise and determine the correct course of action. A test drive may be necessary to duplicate the noise. Once the mechanic has ascertained the cause of the problem, a repair can be made.

How important is this service?

If your clutch is making noise during use, it’s more than just an embarrassing annoyance. It’s a sign that there’s something going wrong. The most common problems to fit these symptoms are failed bearings (pilot, throw out and release), but a worn clutch can also cause similar issues. One of our professional mechanics can determine the actual cause of your problem and repair your clutch so you can get back on the road and enjoy peace of mind.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Victor

35 years of experience
229 reviews
Victor
35 years of experience
Chrysler Grand Voyager V6-3.3L - Oil Change - Albuquerque, New Mexico
We have used Victor many times now for work on our vehicle. We will continue to use him for all our vehicle service needs. He is prompt, courteous, knowledgeable and professional. I never have to worry about the work being completed or if there will be any issues. Its done right the 1st time! The convenience and pricing are exceptional values.

Robert

32 years of experience
191 reviews
Robert
32 years of experience
Chrysler Grand Voyager V6-3.3L - Check Engine Light is on - San Jose, California
Oil leak. Robert was professional and did an excellent job. The cost was very reasonable. I was very pleased with his service! I would use his service again!

Victor

35 years of experience
229 reviews
Victor
35 years of experience
Chrysler Grand Voyager V6-3.3L - Starter - Albuquerque, New Mexico
Victor arrived on time; very personable; got right to work; had repair completed in one hour. Was very thorough and went over all spects of work to be done kept me informed of progress along the way. I will definitely be using Victor again. The service cost was less than shop price and worth every penny spent.

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Chrysler Grand Voyager V6-3.3L - Brakes, Steering and Suspension System - Vancouver, Washington
Very pleased with Jose, he was very efficient and thorough. He really knows what he is doing.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Chrysler Grand Voyager services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...
P2431 OBD-II Trouble Code: Secondary Air Injection System Air Flow / Pressure Sensor Circuit Range / Performance Bank 1
P2431 P2431 code definition Secondary Air Injection System Air Flow / Pressure Sensor Circuit Range / Performance Bank 1 What the P2431 code means The secondary air injection system is used to add air into the exhaust to reduce vehicle...
P0804 OBD-II Trouble Code: Upshift (Skip Shift) Lamp Control Circuit Malfunction
What What the P0804 code means Your vehicle’s powertrain control module (PCM) has detected a malfunction in the one through four skip shift solenoid lamp control circuit. The one through four skip shift solenoid control circuit is also known as...

Why Does an Engine Idle Fast or Slow?

Several factors can cause a fast or slow engine idle. Running the air conditioning or defroster will speed up the idle speed of the engine. Components that impact the engine idle speed include the idle air control motor valve, air...

My car clicks once and won't start.

Prior to performing diagnostics be sure that you have a fully, 100% charged battery that passes a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection). Confirm that the engine immobilizer system (security system) is not activated thus preventing the car from starting. If the immobilizer...

2007 bmw 335i code for ignition control module. Trying to figure out which part to get to replace

The code related to the ignition module suggests that either the ignition module itself is bad or the connections to it are not good resulting in erratic ignition timing and potentially misfires. In some cases, depending on how the ignition...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com