Chevrolet Uplander Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(89)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(89)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Chevrolet Uplander Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Chevrolet UplanderV6-3.9LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Chevrolet UplanderV6-3.9LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Chevrolet UplanderV6-3.9LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Chevrolet UplanderV6-3.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2006 Chevrolet UplanderV6-3.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2009 Chevrolet UplanderV6-3.9LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chevrolet Uplander Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(89)

Rating Summary
85
2
0
0
2
85
2
0
0
2

Berchel

18 years of experience
101 reviews
Berchel
18 years of experience
Chevrolet Uplander V6-3.9L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Towson, Maryland
Well prepared & knowledgeable

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Chevrolet Uplander V6-3.9L - Brake Rotor/Disc Replacement (Rear) - Anaheim, California
Quick service, will use again

Ricardo

23 years of experience
199 reviews
Ricardo
23 years of experience
Chevrolet Uplander V6-3.9L - Car is not shifting into park - Miami, Florida
Excellent. Professional and very knowledgeable.

Robert

23 years of experience
253 reviews
Robert
23 years of experience
Chevrolet Uplander V6-3.9L - Battery - Spring, Texas
Robert, contacted me and advised he was on the way. He arrived shortly thereafter. He was very Friendly and Professional. He repaired my vehicle and also did a courtesy inspection. Thank you.

Excellent Rating

(89)

Rating Summary
85
2
0
0
2
85
2
0
0
2
Number of Chevrolet Uplander services completed
979+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Is it Safe to Drive With Brake Warning Light On?
The The brakes on your vehicle allow you to stop safely, especially in emergency situations. If your Brake Warning Light comes on, you should take notice and contact your mechanic immediately. Brakes are the most important safety feature on your...
How to Check a Car’s Child Safety Seat
Having Having a child in your care – either your own or another’s – is a great responsibility. When you go on the road together, there are certain precautions you need to take to minimize the risk of harm in...
P0709 OBD-II Trouble Code: Transmission Range Sensor Circuit Malfunction
P0709 P0709 code definition The P0709 code is known as Transmission Range Sensor Circuit Intermittent. What the P0709 code means The meaning of P0709 varies slightly among makes and models, but in general, this code indicates that the PCM (powertrain...

Check Engine Light reveals an incorrect flow on the secondary air injection system

Hello. There are a lot of things that can go wrong with the secondary air injection system on this vehicle. It can be anything from a bad pump to a solenoid. A failing oxygen sensor can also throw off the...

Tried to reset key fob didn't work now immobiliser activated.

The Immobilizer System indicator light comes on for a few seconds, then it goes out when you turn the ignition switch to the 'ON' position. The Immobilizer System light will blink if it cannot recognize the key coding. Try reprogramming...

Throttle control warning light is on and I have no power.

Hi there. The code P2127 (https://www.yourmechanic.com/article/p2127-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-e-circuit-low-by-spencer-clayton) is coming on for the throttle position sensor being disconnected or not communicating with the ECM (computer). Check the throttle position sensor to see if the resistance changes when the throttle is opened and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com