Chevrolet Trailblazer Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(503)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(503)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet Trailblazer Front Crankshaft Seal Replacement is $482 with $34 for parts and $448 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Chevrolet TrailblazerL6-4.2LService typeFront Crankshaft Seal ReplacementEstimate$625.80Shop/Dealer Price$659.23 - $731.15
2005 Chevrolet TrailblazerL6-4.2LService typeFront Crankshaft Seal ReplacementEstimate$594.27Shop/Dealer Price$621.51 - $688.80
2008 Chevrolet TrailblazerL6-4.2LService typeFront Crankshaft Seal ReplacementEstimate$594.27Shop/Dealer Price$621.60 - $688.95
2008 Chevrolet TrailblazerV8-5.3LService typeFront Crankshaft Seal ReplacementEstimate$1120.55Shop/Dealer Price$1158.21 - $1241.93
2009 Chevrolet TrailblazerL6-4.2LService typeFront Crankshaft Seal ReplacementEstimate$594.27Shop/Dealer Price$626.75 - $697.97
2007 Chevrolet TrailblazerL6-4.2LService typeFront Crankshaft Seal ReplacementEstimate$594.27Shop/Dealer Price$622.08 - $689.81
2006 Chevrolet TrailblazerL6-4.2LService typeFront Crankshaft Seal ReplacementEstimate$594.27Shop/Dealer Price$621.65 - $689.04
2006 Chevrolet TrailblazerV8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$1120.55Shop/Dealer Price$1158.21 - $1241.93
Show example Chevrolet Trailblazer Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(503)

Rating Summary
474
17
2
5
5
474
17
2
5
5

Claud

6 years of experience
341 reviews
Claud
6 years of experience
Trailblazer 2003 - Control Arm Assembly - Southfield, MI
Claud was Great. Very professional. I have used Claud more then once. Will use him again in the future if needed.

John

23 years of experience
879 reviews
John
23 years of experience
Trailblazer 2008 - Window Regulator - Friendswood, TX
Excelente service at time and fast work

Refugio

20 years of experience
49 reviews
Refugio
20 years of experience
Trailblazer 2005 - Oil/Fluid Leak - San Antonio, TX
He showed up early, was friendly and gave me a honest opinion.

Jimmi

25 years of experience
156 reviews
Jimmi
25 years of experience
Trailblazer 2007 - Throttle Body - Kissimmee, FL
Jimmi came early and serviced my car. He was very knowledgeable, friendly ,and very good at explaining the problem . I will request another service for my car using Jimmi's expertise next week.

Excellent Rating

(503)

Rating Summary
474
17
2
5
5
474
17
2
5
5
Number of Chevrolet Trailblazer services completed
5533+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

The Most Common Error Codes for Transmission Problems
If your Check Engine Light has come on, there are a number of conditions that could be causing it. Many are related...
The Traveler’s Guide to Driving in Mexico
Mexico Mexico has a rich culture and a long history, as well as some stunning attractions (https://www.tripadvisor.com/Attractions-g150768-Activities-Mexico.html). Whether you are looking for historical sites, museums, or the beaches, there is something for you in Mexico. You could visit the ruins...
What Causes an Oil Filter to Get Dirty?
At At some point during your time as a vehicle owner, you’ve likely had your oil filter changed, probably at the same time as an oil change. Few people give this minor maintenance more than a second thought. After all,...

Rattling sound coming from the front tires

Hi there: Usually a small rattle while driving slow is caused by a loose component such as strut dust boots and foam insulator, wheel center caps, plastic inner fenders and splash guards that have come loose. In many cases it...

Would a coolant temperature sensor cause the car not to start

A coolant sensor is capable to give a temperature feedback from neg 40 degrees to above 280 degrees. If the sensor is reading too high of temperature when compared to the ambient air temperature sensor when first started then the...

Engine light on. Problems accelerating

Hi There, Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com