Chevrolet Suburban 3500 HD Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(114)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(114)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Suburban 3500 HD Control Arm Assembly Replacement is $1110 with $970 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$2296.00Shop/Dealer Price$2789.16 - $4249.99
2017 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$2275.28Shop/Dealer Price$2764.37 - $4222.16
2017 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$2085.49Shop/Dealer Price$2572.22 - $4028.24
2017 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$2085.49Shop/Dealer Price$2572.22 - $4028.24
2018 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$2085.49Shop/Dealer Price$2573.70 - $4030.82
2016 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$2085.49Shop/Dealer Price$2572.36 - $4028.49
2018 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$2085.49Shop/Dealer Price$2572.24 - $4028.27
2016 Chevrolet Suburban 3500 HDV8-6.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$2085.49Shop/Dealer Price$2572.22 - $4028.24
Show example Chevrolet Suburban 3500 HD Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(114)

Rating Summary
102
5
4
0
3
102
5
4
0
3

Zackery

6 years of experience
52 reviews
Zackery
6 years of experience
Chevrolet Silverado 1500 V8-5.3L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Auburn, Washington
Showed up over an hour past scheduled time... but speed kills, along with his down to earth vibe was reassuring. Only took 2 hours to get the job done. Very knowledgeable. Definitely would recommend.

Nolan

31 years of experience
296 reviews
Nolan
31 years of experience
Chevrolet Malibu L4-2.0L Turbo - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Tucson, Arizona
Nolan was friendly and efficient, he got the job done in a timely manner. Very satisfied with the work! Thank you Nolan.

Jose

11 years of experience
41 reviews
Jose
11 years of experience
Chevrolet Malibu L4-2.4L - Control Arm Assembly Replacement (Front Lower Left) - Chicago, Illinois
Wonderful, knowledgeable mechanic. I really enjoyed my interaction with him.

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Chevrolet S10 V6-4.3L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Phoenix, Arizona
Great dam good work

Excellent Rating

(114)

Rating Summary
102
5
4
0
3
102
5
4
0
3
Number of Chevrolet Control Arm Assembly Replacement services completed
1254+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P2764 OBD-II Trouble Code: Torque Converter Clutch Pressure Control Solenoid Control Circuit Low
P2764 means the system is receiving a faulty signal from the torque converter clutch pressure control due to failing transmission or electrical issues
Is it Safe to Drive With a Stuck Caliper?
The caliper is part of the brake assembly which houses the brake pads and pistons. If you have a stuck caliper, the...
How to Replace a Cruise Control Brake Release Switch
The cruise control is turned off by the brake release switch which fails either when the cruise control does not deactivate or does not set properly.

Do the seats fold down to become a flat surface? 2011 Honda CR-Z

After some research, it seems that the panel does in fact fold down to create a larger cargo area on some models. Consult your owners manual for the specific procedure on folding down the separation panel in your vehicle.

location of starter relay

Hello, thank you for writing in. The starter relay is located in the main fuse box. This fuse box is located in the engine compartment. You will be looking for a black box with a removable lid. Once you have...

Transmission Service, 2007 Tundra 60K Miles

With the mileage that your vehicle has, it is okay to go ahead and do the flush. The flush will do a better job of getting all the dirty fluid out. The reason the flush is not recommended as for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com