Chevrolet Silverado 1500 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 Car Thermostat Replacement is $223 with $83 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Chevrolet Silverado 1500V8-4.8LService typeCar Thermostat ReplacementEstimate$348.36Shop/Dealer Price$400.30 - $548.02
2008 Chevrolet Silverado 1500V8-4.8LService typeCar Thermostat ReplacementEstimate$384.43Shop/Dealer Price$438.94 - $597.52
2003 Chevrolet Silverado 1500V8-5.3LService typeCar Thermostat ReplacementEstimate$334.69Shop/Dealer Price$383.72 - $526.64
2005 Chevrolet Silverado 1500V6-4.3LService typeCar Thermostat ReplacementEstimate$314.57Shop/Dealer Price$358.57 - $486.40
2009 Chevrolet Silverado 1500V6-4.3LService typeCar Thermostat ReplacementEstimate$314.57Shop/Dealer Price$360.05 - $488.98
2010 Chevrolet Silverado 1500V6-4.3LService typeCar Thermostat ReplacementEstimate$314.57Shop/Dealer Price$358.71 - $486.65
2009 Chevrolet Silverado 1500V8-4.8LService typeCar Thermostat ReplacementEstimate$384.43Shop/Dealer Price$438.99 - $597.60
2011 Chevrolet Silverado 1500V8-4.8LService typeCar Thermostat ReplacementEstimate$384.43Shop/Dealer Price$438.97 - $597.57
Show example Chevrolet Silverado 1500 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0

Chris

15 years of experience
2435 reviews
Chris
15 years of experience
Silverado 1500 2014 - Thermostat - Murrieta, CA
Chris is my go to mechanic, I’ve even told my friends and family about his good work, and are happy with him as well. Thank you!

Jason

0 years of experience
417 reviews
Jason
0 years of experience
Silverado 1500 2003 - Thermostat - Irving, TX
Jason provided excellent service. He completed the repairs and took the time to explain what the issue was. Highly recommended.

Stacy

20 years of experience
330 reviews
Stacy
20 years of experience
Silverado 1500 2005 - Thermostat - Riverdale, GA
Stacy was friendly and knowledgeable

Francisco

10 years of experience
45 reviews
Francisco
10 years of experience
Silverado 1500 2010 - Exterior Door Handle - Austin, TX
Was very fast ! Put a driver side door handle on in about 25 minutes ! The labor rate was reasonable and so was door handle ! Will probable hire again soon ! THANKS FRANCISCO !

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0
Number of Chevrolet Silverado 1500 Car Thermostat Replacement services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Strut Assembly
Common signs include knocking noises when driving over bumps, a bumpy ride, floating front end, and uneven tire wear.
How to Buy Good Quality Sun Visors
Your Your car’s sun visors provide you with protection from the sun’s glare while you’re driving. Unless the sun is above the edge of the roof, it’s possible that the glare could at least partially blind you while driving. This...
A Buyer's Guide to the 2012 Nissan Quest
If If your family has gotten to the size where a minivan makes sense, you have a huge market to explore. Start with the 2012 Nissan Quest, though, and you may find that your search becomes a relatively short one....

Whooshing sound from rear brakes

Hi there, thanks for writing in. I'd be happy to offer my insight. If the brakes are dragging when you let of the brakes, then you may have binding caliper slides or pads binding in the caliper bracket. I'd recommend...

Feeling a jerk when shifting from park to drive I already replaced the rear end mounting bushing twice do you have any idea

Hello there. The jerk when shifting from park to drive is a common problem with your 2006 Cadillac CTS. The most common causes are the engine mounts (https://www.yourmechanic.com/services/engine-mount-replacement) or the transmission mounts. Your vehicle has several engine mounts and transmission...

Car won't start, it doesn't even click and i know i need my valve gasket cover replaced.

Hi There, A number of things may cause the vehicle not to start, but still provide power to the lights and accessories. It sounds like what you are describing may be related to a faulty starter relay. The starter relay...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com