Chevrolet Optra Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,075)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,075)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Chevrolet Optra Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chevrolet OptraL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Chevrolet OptraL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Chevrolet OptraL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Chevrolet OptraL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Chevrolet Optra Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,075)

Rating Summary
14,121
474
110
84
286
14,121
474
110
84
286

Pedro

25 years of experience
10 reviews
Pedro
25 years of experience
Chevrolet Optra L4-2.0L - Oil is leaking into spark plug well - Kissimmee, Florida
Professionnal & educational.

Claud

8 years of experience
503 reviews
Claud
8 years of experience
Chevrolet Sonic L4-1.8L - Car Battery Replacement - Warren, Michigan
Claud was very friendly yet professional. Showed up on time and got the job done quickly. Couldn't ask for anything more.

Chris

18 years of experience
495 reviews
Chris
18 years of experience
Chevrolet Silverado 1500 V8-5.3L - Window is not working - Garland, Texas
very friendly and understanding and professional

Michael

27 years of experience
499 reviews
Michael
27 years of experience
Chevrolet Impala V8-5.7L - Car is not starting - Mesa, Arizona
Very professional, and timely manner. Well informed. Great customer service.

Excellent Rating

(15,075)

Rating Summary
14,121
474
110
84
286
14,121
474
110
84
286
Number of Chevrolet services completed
165825+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

5 Essential Things to Know Before Driving on Country Roads
Rural Rural roadways offer a great driving experience – there’s typically less traffic, the speed limit is often 60 mph and everyone likes testing their driving expertise on those winding paths. However, before you pack up and head out, there...
P3409 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Malfunction
P3409 P3409 code definition The P3409 code is Cyl2 Deactivation/Intake Valve Control Circuit/Open. Cyl2 narrows the issue down to engine cylinder number 2. Other codes in the P3400 series may present concurrently with P3409, indicating a problem with another cylinder’s...
P0668 OBD-II Trouble Code: PCM/ECM/TCM Internal Temperature Sensor Circuit Low
P0668 means there is a problematic temperature reading from the engine or transmission. This could be due to a faulty sensor or wire, or overheating.

Car makes a clicking sound when turning

Hello! One general giveaway of a bad CV axle is a clicking sound when turning. CV axles are vital to the stability of the vehicle and they transfer the power to the wheels to make them turn. Noisy CV axles...

After driving awhile, when idling, RPM drops below 500 & car stalls. Happens rarely but RPM fluctuates, and drops suddenly.

If you are having a stalling problem (https://www.yourmechanic.com/article/how-to-fix-a-stalling-car) then you may have a computer code stored in memory. I suggest having the computer scanned to see if there is any codes stored and diagnose them as needed. The intake hose...

Cold engine misfire and hesitation - 1997 Dodge Dakota

Hi. I believe the ambient air temperature sensor, which measures the intake air temperature for engine management, has failed. It is reporting a far higher temperature than the engine is getting, as you have noted. Engine management is creating a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com