Chevrolet K3500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet K3500 Front Crankshaft Seal Replacement is $156 with $16 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet K3500V8-6.2L DieselService typeFront Crankshaft Seal ReplacementEstimate$302.72Shop/Dealer Price$318.65 - $352.65
1990 Chevrolet K3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$331.20Shop/Dealer Price$344.67 - $376.84
1997 Chevrolet K3500V8-6.5L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$185.21Shop/Dealer Price$196.87 - $227.68
1999 Chevrolet K3500V8-6.5L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$248.75Shop/Dealer Price$276.30 - $354.76
1996 Chevrolet K3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$302.87 - $336.53
1993 Chevrolet K3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.79 - $250.84
1999 Chevrolet K3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$325.80Shop/Dealer Price$348.39 - $409.00
1994 Chevrolet K3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.63 - $250.56
Show example Chevrolet K3500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(13)

Rating Summary
10
2
0
0
1
10
2
0
0
1

Joel

22 years of experience
987 reviews
Joel
22 years of experience
Chevrolet K3500 V8-7.4L - Ignition Coil - Middleburg, Florida
He was completely professional an honest even though I had a rare problem he achieved our goal

Jerome

25 years of experience
415 reviews
Jerome
25 years of experience
Chevrolet K3500 V8-5.7L - Brakes, Steering and Suspension Inspection - Baltimore, Maryland
On time, knowledgeable, professional and a good communicator. I am an engineer and I dont impress easily. Jerome has my confidance for any and all future work.

Ben

19 years of experience
114 reviews
Ben
19 years of experience
Chevrolet K3500 V8-7.4L - Fuel Pump - Englewood, Colorado
Prompt, nice and intelligent.

David

17 years of experience
639 reviews
David
17 years of experience
Chevrolet K3500 V8-6.5L Turbo Diesel - Brake Pads Replacement (Rear) - Concord, California
David was great. I had problems with other mechanics arriving without tools for my truck but David had everything. He let me help and answered all my questions while he worked. very friendly and I am so happy to find a mechanic that works on Diesels Thank you David

Excellent Rating

(13)

Rating Summary
10
2
0
0
1
10
2
0
0
1
Number of Chevrolet K3500 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Anti Lock Pressure Switch
If your ABS system is not working or continuously running, or if your brakes are locking up, you may have to replace the anti-lock pressure switch.
How to Buy a Good Quality Ignition Cable (Spark Plug Wires)
Spark Spark plug wires connect the spark plug to what they’re creating a spark in. Whenever you are changing out your spark plugs, it’s a good idea to check on those spark plug wires to be sure they’re up to...
P0196 OBD-II Trouble Code: Engine Oil Temperature (EOT) Sensor low
P0196 P0196 code definition Engine Oil Temperature (Engine Oil Temperature) Sensor Range/Performance What the P0196 code means This code means the there is a problem with the circuits of the EOT system What causes the P0196 code? The P0196 code...

When replacing a crank shaft part will the work send the timing chain off track?

Claimed by Kevin Gainer

Shifting gears

Hi Trond. Thanks for contacting us tonight. Newer cars today are built for longevity - as opposed to performance. As such, an automatic transmission will shift more efficiently in "D" as opposed to the manual shifting option. Overtime, manually shifting...

I have a 2010 Ford Explorer. There is a leak in a [coolant](/topics-coolant-ford/) pipe near the heater core intake outake pipe/hoses. It's actually a tiny hole in the pipe itself, which is dripping down at about 5 drops per second when the [engine](/topics-engine-ford/) is running.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com