Chevrolet K2500 Suburban Power Steering Pump Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Chevrolet K2500 Suburban Power Steering Pump Replacement is $393 with $113 for parts and $280 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1995 Chevrolet K2500 SuburbanV8-7.4L	Service typePower Steering Pump Replacement	Estimate$548.64	Shop/Dealer Price$615.50 - $799.88
1993 Chevrolet K2500 SuburbanV8-7.4L	Service typePower Steering Pump Replacement	Estimate$530.62	Shop/Dealer Price$593.95 - $775.68
1999 Chevrolet K2500 SuburbanV8-7.4L	Service typePower Steering Pump Replacement	Estimate$530.62	Shop/Dealer Price$594.00 - $775.77
1992 Chevrolet K2500 SuburbanV8-7.4L	Service typePower Steering Pump Replacement	Estimate$530.62	Shop/Dealer Price$594.00 - $775.76
1993 Chevrolet K2500 SuburbanV8-5.7L	Service typePower Steering Pump Replacement	Estimate$517.72	Shop/Dealer Price$580.82 - $755.12
1997 Chevrolet K2500 SuburbanV8-7.4L	Service typePower Steering Pump Replacement	Estimate$530.62	Shop/Dealer Price$594.28 - $776.25
1998 Chevrolet K2500 SuburbanV8-5.7L	Service typePower Steering Pump Replacement	Estimate$530.62	Shop/Dealer Price$594.03 - $775.82
1992 Chevrolet K2500 SuburbanV8-5.7L	Service typePower Steering Pump Replacement	Estimate$517.72	Shop/Dealer Price$577.87 - $749.96

Show example Chevrolet K2500 Suburban Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
The threaded connectors to the pump inlet and outlet are loosened and removed.
Any mounting bolts and brackets are removed so the pump can be removed.
If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15)

Rating Summary

14

1

0

0

0

14

1

0

0

0

SEE REVIEWS NEAR ME

Frank

28 years of experience

66 reviews

Frank

28 years of experience

by Shirley

Chevrolet K2500 Suburban V8-5.7L - Alternator - Denver, Colorado

Frank was very professional and careing. He did a great job.. very efficient. I recommend him to. Everyone who has car problems. Especially being out of town it is hard to find someone that can be trusted. I recommend frank and your company to everyone traveling. Thank you.

Wes

11 years of experience

5 reviews

Wes

11 years of experience

by Kamal

Chevrolet K2500 Suburban V8-7.4L - Starter - Glendale, Arizona

Wes got the appointment at the last minute. Was going to be a little late from previous job but he texted to inform me. Turned out the problem I thought was going on wasn't an issue at all. He put some extra time in to make sure everything was good to go and vehicle was up and running again. I would definitely book him again.

Chris

12 years of experience

281 reviews

Chris

12 years of experience

by Kamal

Chevrolet K2500 Suburban V8-7.4L - Axle Shaft Seal Replacement (Front) - Glendale, Arizona

Chris was on time. I made a few changes to the original services booked and Chris was able to accommodate me. He finished the work in a timely manner. He was easy to talk with. Only a few days since repair and everything seems good to go.

Chris

12 years of experience

281 reviews

Chris

12 years of experience

by Kamal

Chevrolet K2500 Suburban V8-7.4L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Glendale, Arizona

It was an early morning appt and Chris was on time. The job had a few delays out of his control. This was 2nd time Chris worked on my truck and all looks good.

Excellent Rating

(15)

Rating Summary

14

1

0

0

0

14

1

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

Symptoms of a Bad or Failing Parking Brake Warning Switch

If your car's Brake Warning Light comes on, especially if it gets brighter, you may need to replace the parking brake warning switch.

How to Replace a Proportioning Valve

The brakes on the rear wheels may lock up when the brake is applied especially when surfaces are wet if the proportioning valve is failing.

The Guide To Colored Curb Zones in Wyoming

Wyoming Wyoming parking laws: understanding the basics Driving is a big responsibility, and people know that they need to pay attention behind the wheel. They need to be careful of their actions, and they have to be aware of the...

What are some safety tips when towing?

When towing a trailer, there are certain safety precautions you can take to make sure that you can your cargo will be safe. Some precautions you can take when towing are. Make sure that you do not exceed the recommended...

When ever I give my car a little gas I hear the fan get louder

If the noise is loud and constant then the cooling fan clutch is stuck in the applied position, causing the fan to be locked to the water pump shaft. The fan clutch is suppose to change as the temperature changes...

Catalytic converter

It is possible that the O2 sensor on bank 1 is what has failed. Many times catalytic converters are replaced when the O2 sensor is actually the problem. This can also happen in the exact opposite way where the catalytic...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com