Chevrolet Impala Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Chevrolet Impala Throttle Body Replacement is $364 with $269 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet ImpalaV6-3.6LService typeThrottle Body ReplacementEstimate$731.15Shop/Dealer Price$895.19 - $1364.81
1970 Chevrolet ImpalaV8-5.7LService typeThrottle Body ReplacementEstimate$813.03Shop/Dealer Price$1002.56 - $1548.60
1968 Chevrolet ImpalaV8-5.0LService typeThrottle Body ReplacementEstimate$2314.11Shop/Dealer Price$2878.91 - $4550.76
2014 Chevrolet ImpalaL4-2.4L HybridService typeThrottle Body ReplacementEstimate$544.15Shop/Dealer Price$666.44 - $1010.80
1969 Chevrolet ImpalaV8-5.0LService typeThrottle Body ReplacementEstimate$2314.11Shop/Dealer Price$2878.92 - $4550.79
1980 Chevrolet ImpalaV6-3.8LService typeThrottle Body ReplacementEstimate$2061.55Shop/Dealer Price$2563.21 - $4045.64
2004 Chevrolet ImpalaV6-3.8LService typeThrottle Body ReplacementEstimate$1116.61Shop/Dealer Price$1374.60 - $2117.44
1983 Chevrolet ImpalaV6-3.8LService typeThrottle Body ReplacementEstimate$2066.55Shop/Dealer Price$2568.44 - $4051.06
Show example Chevrolet Impala Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Chevrolet Impala Throttle Body Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How a Keyless Push-Button Ignition Works
Technology Technology has advanced for automotive security and user-focused features, and a shift is occurring where traditional key-and-cylinder starting systems are being replaced by keyless push-button ignition systems. They are incredibly simple to operate and provide excellent security. The system...
P2650 OBD-II Trouble Code: “B” Rocker Arm Actuator Control Circuit Open Bank 1
P2650 P2650 trouble code definition “B” Rocker Arm Actuator Control Circuit Open Bank 1 What the P2650 code means P2650 is an OBD-II generic code for the engine control module (ECM) detecting the B rocker arm actuator control circuit for...
P2504 OBD-II Trouble Code: Charging System Voltage High
P2504 P2504 code definition The P2504 OBD-II fault code simply means that an irregularity was detected in the charging system circuit - specifically that the voltage was high. This high voltage reading may have originated from the battery, charging system,...

What Types of Metals Are Used to Make Exhaust Systems?

Chances are good that your exhaust system is made from 400-series steel. Cast iron is used for the exhaust manifold (stock). Aluminized steel is often used in aftermarket exhaust systems. In addition, a wide range of other metals can be...

Car makes a medium pitched whine or growl in sync with rpms.

If you are hearing the noise at idle when the car is not moving, generally the noise you are describing originates in the engine, the transmission (torque converter runs even at idle), and/or the accessory drives. However, if there is...

Gas odor

It sounds like the evap vent is clogged near the fuel tank. This will cause the excessive pressure build up of pressure and the canister vent can get blocked with debris. Have this system checked and repaired as needed.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com