Chevrolet G10 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(14)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(14)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet G10 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1979 Chevrolet G10V8-5.7LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1989 Chevrolet G10V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1976 Chevrolet G10V8-6.6LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Chevrolet G10V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1977 Chevrolet G10V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1992 Chevrolet G10V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1977 Chevrolet G10V8-5.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Chevrolet G10V8-5.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet G10 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Chevrolet G10 V8-5.0L - Alternator - Charlotte, North Carolina
Install went well.

Luis

18 years of experience
321 reviews
Luis
18 years of experience
Chevrolet G10 L6-4.1L - Starter - Elizabeth, New Jersey
Prompt, honest and friendly. Couldnt ask for more in a mechanic

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Chevrolet Equinox V6-3.4L - Windows - Lakeland, Florida
Very professional, knowledgeable and quick, will be using him again

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Chevrolet Impala V6-3.9L - Windows - Charlotte, North Carolina
Excellent customer service and was very easy to work with he actually showed up earlier to get started on the job

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0
Number of Chevrolet Windows Inspection services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How Does a Defroster Work?
We’ve We’ve all been there. You slide behind the wheel, crank the engine and then stop. You realize that you really can’t go anywhere because your windshield is fogged up. Thankfully, you can just turn on the defroster and let...
Symptoms of a Bad or Failing Control Arm Assembly
Common signs include a vibrating steering wheel, steering pulling to the left or right, and clunking noises.
The Best Tool For Car Mechanics that has no Dependence on an Air Compressor
Automotive technician jobs require tools that work independently of air compressors. Mac Tools has a 20 volt cordless drive electric impact wrench.

Code for pressure solenoid D

The P2716 code is produced when the ECM has detected that the throttle body actuator motor has failed to read the correct position at which the butterfly valve within the throttle body should be in order to produce a smooth...

Audi A4 '08 is jerking and check engine light flashes upon acceleration, any idea what could be happening?

This may be related to a faulty throttle position sensor or potentially a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is...

Horn honks when the 10 minute run time times out.

Hello, thank you for writing in. This is security feature is designed to remind you the vehicle is still running to protect against thieves and high idle times. These idle times add to pollution, and are a main cause of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com