Chevrolet Classic Loud noise is coming from rear brakes Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(89)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(89)

Loud noise is coming from rear brakes Inspection Service

How much does a Loud noise is coming from rear brakes Inspection cost?

On average, the cost for a Chevrolet Classic Loud noise is coming from rear brakes Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Chevrolet ClassicL4-2.2LService typeLoud noise is coming from rear brakes InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2005 Chevrolet ClassicL4-2.2LService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chevrolet Classic Loud noise is coming from rear brakes Inspection prices

Depending on the make and model you drive, you might have disc brakes on the front and drum brakes on the rear, or you could have four-wheel disc brakes. These are becoming more and more common today. However, regardless of the configuration, you should not have a loud noise coming from the rear brakes. This indicates that something has gone wrong, and there are several potential culprits.

How this system works:

Your rear brakes work similar to the front brakes. The master cylinder sends pressurized fluid through the brake lines. If you have rear drum brakes, the fluid causes the actuator to push the brake shoes outward, where they press against the inside of the drum. In the case of rear disc brakes, the fluid activates the caliper, which then squeezes the caliper between two brake pads.

This is identical to how your front brakes operate, but the pads are generally smaller than those used on the front. This is because most of the stopping power in your car is generated in the front.

However, your rear brakes are just as important as the front, and if you’re noticing a loud noise from the rear during braking, it could be a number of different things, depending on the type of noise and when it occurs.

Common reasons for this to happen:

  • Worn Brake Pads: Obviously, the most common potential problem here is worn out rear pads (or shoes if you have drum brakes). If you notice a loud grinding sound, it could be the metal backing plate from the pads making contact with the rotor.

  • Broken or Missing Caliper Bolt: Your calipers are essentially two halves held together with bolts (not the slide pins). If one of the bolts is missing or broken, it’s possible that part of the caliper has popped out and is making contact with your wheel.

  • Contact with the Squealer: Squealers are metal tabs designed to lightly contact the rotor and create a noise that warns you the pads are wearing down. If your pads are nearing the end of their life, it’s possible this is the noise you’re hearing.

  • Parking Brake Shoes Stuck: Your parking brake is located in the rear of the car. In a disc brake setup, there are shoes located inside the inner drum built into the rotor. If the shoes are stuck, it’s possible that the sound you’re hearing is them contacting metal while you’re driving.

  • Wheel Bearing Failure: If the noise you’re hearing is a “howl” and it’s constant, the first thing to suspect would be one of the wheel bearings (whichever side is the loudest while you’re driving).

  • Pads Settling into Place: If the sound you’re hearing is more of a “pop” or a loud click, it might be nothing more than your brake pads being slightly worn and settling into place when you push the brake pedal.

  • Normal Pad Vibration: If you only hear the noise when you’re backing up, it’s possible that it is just a normal vibration caused by the friction material of the pad lightly contacting the rotor’s surface. This is called “resonant frequency”, and can occur with both disc and drum brakes.

What to expect:

A top-rated mobile mechanic will come to your home or office and will inspect your rear brakes. This inspection will include the drums and shoes or the rotors and calipers. It should also include the brake lines and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your rear brake pads, the rotors, calipers, and the brake lines. It may be necessary to remove one or both rear wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify any and all noises.

How important is this service?

The mechanic will visually inspect the rear brakes, as well as other components that might be causing the noise you’re experiencing. It might be necessary for the mechanic to test drive the vehicle in order to duplicate the noise and better diagnose the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(89)

Rating Summary
82
3
2
1
1
82
3
2
1
1

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Chevrolet Classic L4-2.2L - Oil Change - Nashville, Tennessee
Very nice and professional. He was quick and thorough. Will look for him again, when necessary.

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Chevrolet Classic L4-2.2L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Portland, Oregon
Jose was great. Showed up on time, professional, informative. He explained what he was doing and how the component (O2 sensor in my case) worked. Would definitely use him again if needed.

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Chevrolet Classic L4-2.2L - Car is not starting - Murrieta, California
Wow how awesome! Chris, was here much earlier then original appointment time so I appreciate that!!! he checked out my car asap knew the issue and I am scheduled for repairs and parts wed/4/14/21 with Chris so far this has been great and to have a awesome mechanic who knows what they are doing and check out your car right in front of you! I hope the up coming install and repair goes equally as well and If so I don't think I will ever go back into a shop lol Thank you!!

Sedat

20 years of experience
19 reviews
Sedat
20 years of experience
Chevrolet Classic L4-2.2L - Oil Change - Arlington, Texas
Sedat was better than I expected I hope to have him service my car on a regular basis.

Excellent Rating

(89)

Rating Summary
82
3
2
1
1
82
3
2
1
1
Number of Chevrolet Classic services completed
979+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Leaking Gas Tank?
A leaking gas tank can be caused by a number of different things, such as rocks or sharp objects your car picks up...
P0143 OBD-II Trouble Code: O2 Sensor Circuit Low voltage (Bank 1, Sensor 3)
Diagnostic Diagnostic Trouble Code (DTC): P0143 P0143 code definition O2 Sensor Circuit Low voltage (Bank 1 Sensor 3) What the P0143 code means P0143 is the OBD-II generic code indicating that the Engine Control Module (ECM) input from the O2...
Why More Fuel Efficient Cars are Not Enough to Offset Growing Fuel Use
Fuel efficient electric and hybrid cars have not reduced fuel consumption because of increasing populations, longer commutes, and lower gas prices.

Car starts and turns off

Hi there. If the engine is cranking over fine and it just will not start then I would start by cleaning out the throttle body. It is common for the throttle body to become dirty over time which can cause...

The cooling mood on my 2007 chevy cobalt came on out of nowhere. I had a guy pour antifreeze in and it was okay until yesterday.

Hi there. Check the coolant level to see if there is any coolant in the radiator. If there is no coolant (https://www.yourmechanic.com/services/top-off-coolant) in the radiator, then fill up the radiator with water and perform a pressure test. Check to see...

Since mechanic changed engine oil on dashboard flashes service engine soon

The variable valve timing VANOS system on your car can become sticky over time. Particularly if you are not changing the oil diligently. It is a hydraulically operated device that advances the camshaft using engine oil pressure under certain conditions....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com