Chevrolet Celebrity Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Chevrolet Celebrity Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1988 Chevrolet CelebrityL4-2.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1983 Chevrolet CelebrityV6-4.3L DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chevrolet CelebrityL4-2.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Chevrolet CelebrityV6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 Chevrolet CelebrityV6-2.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1982 Chevrolet CelebrityL4-2.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1986 Chevrolet CelebrityL4-2.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1990 Chevrolet CelebrityL4-2.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Celebrity Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Chevrolet Celebrity V6-2.8L - Brake Light Switch - Mesa, Arizona
Peter was efficient timely and professional courteous excellent work thank you Peter

Matthew

33 years of experience
1222 reviews
Matthew
33 years of experience
Chevrolet Celebrity V6-2.8L - Car starts and then dies - Hampton, Virginia
Knowledgeable, although we did not get the vehicle running

Patrick

33 years of experience
1412 reviews
Patrick
33 years of experience
Chevrolet Celebrity V6-2.8L - Water Pump - Austin, Texas
He's a lifesaver.

Jake

8 years of experience
21 reviews
Jake
8 years of experience
Chevrolet Celebrity V6-2.8L - Car is not starting - Mesa, Arizona
Friendly courteous professional

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Chevrolet Celebrity services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How Long Does a Heater Bypass Tube Last?
In In order for the cooling system on your vehicle to work, you will have to make sure that all of its components are repair free. The thermostat that is on your vehicle helps to regulate the flow of coolant...
How to File a Claim When Bad Roads Damage Your Car
Potholes and rough roads can damage car tires, wheels, and exhaust. Gather evidence and documentation to file a car insurance claim for road damage.
P0436 OBD-II Trouble Code: Catalyst Temperature Sensor Range/Performance (Bank 2)
Trouble code P0436 means a catalyst element for engine bank 2 is not working well or are outside the manufacturer's parameters.

Whining from transmission to rear end area 2007 Chevrolet Silverado 1500

Hello - your intuition is correct. The ring and pinion gear are severely worn (https://www.yourmechanic.com/question/rear-differential-humming), and will need to be replaced (w/all new ring and pinion bearings) to eliminate the "noise under load" you notice. Setting up a ring &...

Transmission hot idle engine no check engine light what hapoen

Hello, thank you for writing in. If your transmission is getting hot during idle, there is likely something wrong with fluid or the pump. The transmission oil/fluid is used to help cool the transmission down. Consider the last time that...

Hi Samuel, my Hyundai Accent 07's clutch slides straight to the floor with no resistance, the gears won't catch and the reverse g

Hi there. Usually when this occurs, the issue is with the clutch master cylinder. A clutch master cylinder contains a reservoir that stores the brake fluid. It is connected to the clutch slave cylinder through hoses. When you push the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com