Chevrolet Captiva Sport Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(98)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(98)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Captiva Sport Control Arm Assembly Replacement is $216 with $76 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$683.08Shop/Dealer Price$818.70 - $1217.46
2012 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$674.07Shop/Dealer Price$807.92 - $1205.36
2015 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$703.27Shop/Dealer Price$837.52 - $1235.25
2014 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$872.39Shop/Dealer Price$1048.92 - $1573.49
2012 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$327.87Shop/Dealer Price$370.04 - $487.54
2015 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$843.19Shop/Dealer Price$1019.49 - $1543.89
2015 Chevrolet Captiva SportL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$703.27Shop/Dealer Price$837.54 - $1235.28
2012 Chevrolet Captiva SportV6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$327.87Shop/Dealer Price$368.27 - $484.45
Show example Chevrolet Captiva Sport Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(98)

Rating Summary
95
1
1
0
1
95
1
1
0
1

Daniel

12 years of experience
90 reviews
Daniel
12 years of experience
Chevrolet Captiva Sport L4-2.4L - Car is not starting - Chicago, Illinois
Daniel was very professional and efficient. He came out in the snow right after a snow storm and got right to work. Highly recommend!!!!

Genaro

14 years of experience
309 reviews
Genaro
14 years of experience
Chevrolet Captiva Sport L4-2.4L - Starter - Houston, Texas
Very speedy work and very friendly and knowledgeable.

Bradford

14 years of experience
68 reviews
Bradford
14 years of experience
Chevrolet Captiva Sport L4-2.4L - Heating AC - Brandywine, Maryland
Waiting for the estimate, very satisfied with work.

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Chevrolet Captiva Sport L4-2.4L - Camshaft Position Sensor - Houston, Texas
Breck is in a word "awesome". He fixed my car in less than half an hour and it is now running smoothly without stuttering and stopping. Thank you, Breck! I would definitely request him again for any automotive needs.

Excellent Rating

(98)

Rating Summary
95
1
1
0
1
95
1
1
0
1
Number of Chevrolet Captiva Sport services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace a License Plate Light
When a license plate light bulb goes out, it may be illegal in some states to drive in public. Here's a guide on how to replace it.
Rules of the Road For Maryland Drivers
Driving Driving requires knowledge of the laws so that you can be safe when traveling to your destination. While you likely know the driving laws in your own state, that doesn’t mean they are the same when you visit or...
4 Essential Things to Know About Your Car’s Odometer
The The odometer on a car tells how far the vehicle has traveled. It can be mechanical, electrical, or a combination of the two. Part of the odometer includes a trip meter. A trip meter indicates how far the car...

Wont remote start and shaking like crazy when manual start

Hi there: Usually if the engine is hard to start and once it does, it shakes pretty violently, it's due to a vacuum leak, or a fuel system sensor that is causing this to occur. The only way to really...

What else could cause power steering problems

It starts up and drive but if I stop it dies I used a scan tool and is gave me the codes P0335/P0456

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com