Chevrolet C3500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet C3500 Front Crankshaft Seal Replacement is $156 with $16 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Chevrolet C3500V8-6.2L DieselService typeFront Crankshaft Seal ReplacementEstimate$194.22Shop/Dealer Price$207.63 - $239.74
2000 Chevrolet C3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$303.85Shop/Dealer Price$331.28 - $407.80
1991 Chevrolet C3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$247.59Shop/Dealer Price$260.99 - $295.34
1998 Chevrolet C3500V8-6.5L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$185.21Shop/Dealer Price$196.87 - $227.68
1994 Chevrolet C3500V8-6.5L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$185.21Shop/Dealer Price$198.35 - $230.26
1990 Chevrolet C3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$247.59Shop/Dealer Price$261.18 - $295.68
1994 Chevrolet C3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$300.39 - $332.20
1995 Chevrolet C3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$203.79Shop/Dealer Price$216.63 - $250.56
Show example Chevrolet C3500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1

Noe

37 years of experience
604 reviews
Noe
37 years of experience
Chevrolet C3500 V8-5.7L - Lubricate Hood Hinge - Seattle, Washington
Noe arriver 5 mins early and quickly diagnosed and solved a problem we had been having for a few months. So knowledgeable and very kind. I hope to work with him again next time I have a mechanical issue.

Brad

16 years of experience
86 reviews
Brad
16 years of experience
Chevrolet C3500 V8-7.4L - Distributor - Colorado Springs, Colorado
Knowledgeable friendly and a hell of a good mechanic thanks Brad for replacing my distributor and rotor and cap your a hell of a good mechanic

John

33 years of experience
1126 reviews
John
33 years of experience
Chevrolet C3500 V8-5.7L - Car is not starting - Santa Fe, Texas
Excellent communication and friendly service

Armen

24 years of experience
7 reviews
Armen
24 years of experience
Chevrolet C3500 V8-7.4L - Water Pump Replacement - Tarzana, California
Armen is an excellent craftsman. He knows his profession and even explains the process as he is evaluating and also when he is working I definitely will call him again when the need arises.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1
Number of Chevrolet C3500 services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0620 OBD-II Trouble Code: Generator Control Circuit Malfunction
P0620 code means there is an abnormal voltage reading coming from the ECM often due too a faulty, generator or voltage regulator.
How Long Does a Thermostatic Vacuum Sensor Last?
Winter Winter can make for tricky driving conditions - just starting up your vehicle can be a bit more of a chore. When the engine is cold, it takes a few minutes before it reaches optimal temperature and you should...
What car owners need to know about tune ups
Everything you need to know about car tune ups

Can't start car

The parking brake mechanism controls the rear brakes, and if the rear brakes, or the parking brake cable is overtightened, the brakes may bind. Also, if the parking cables are rusted excessively, then the cables may bind and cause the...

What is the difference between a tensioner and tensioner pulley?

Hi, thanks for your question. For your 2009 Honda Odyssey, the tensioner and tensioner pulley are one unit. They make up what is called the tensioner assembly. This tensioner assembly has two pulleys located on it and they can be...

Why is my car sputtering? 2005 Saturn Ion

Hi there - a car that sputters may have an ignition misfire (https://www.yourmechanic.com/question/misfire-in-engine), or a fuel supply issue (https://www.yourmechanic.com/question/fuel-pressure-low) causing this behavior. You mentioned the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on - getting the problem codes is task #1. The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com