Chevrolet C2500 Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Chevrolet C2500 Headlight Bulb Replacement is $154 with $14 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet C2500V6-4.3LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$185.60Shop/Dealer Price$196.85 - $222.50
1994 Chevrolet C2500V8-6.5L Turbo DieselService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.07 - $210.40
1992 Chevrolet C2500V6-4.3LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
1992 Chevrolet C2500V8-6.5L Turbo DieselService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
1991 Chevrolet C2500V6-4.3LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$187.57 - $213.02
2000 Chevrolet C2500V8-5.7LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.24 - $210.69
1997 Chevrolet C2500V8-6.5L Turbo DieselService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$176.59Shop/Dealer Price$186.11 - $210.47
2000 Chevrolet C2500V8-6.5L Turbo DieselService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$176.59Shop/Dealer Price$186.10 - $210.44
Show example Chevrolet C2500 Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0

Kyle

13 years of experience
113 reviews
Kyle
13 years of experience
Chevrolet C2500 V8-5.7L - Squealing noise from brakes - Las Vegas, Nevada
Knowledgeable and intelligent young man. Best yet. Hang on to him.

Carlos

17 years of experience
362 reviews
Carlos
17 years of experience
Chevrolet C2500 V8-5.7L - Car is not starting - Fort Worth, Texas
Excellent mech,, did outstanding job of overall inspection and trouble shooting cause of failure to start. Pointed out a few other minor problems. He was very good at explaining what he was doing and what he found.

Anthony

12 years of experience
77 reviews
Anthony
12 years of experience
Chevrolet C2500 V8-7.4L - Car is not starting - Bolingbrook, Illinois
My experience with him was great made it out at the time that it was set for to diagnose my vehicle he was professional he was very good at going over everything and explaining what was wrong with my vehicle

Jahmar

19 years of experience
36 reviews
Jahmar
19 years of experience
Chevrolet C2500 V8-5.7L - Clutch - Fort Lauderdale, Florida
After 4 failed attempts at fixing my truck from other mechanics, Jahmar was able to figure out my issue in a short amount of time and got me back on the road. I'm very impressed with his knowledge and service.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0
Number of Chevrolet C2500 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace Hood Support Struts
The hood struts, or lift support, support your vehicle's hood while you access the engine compartment. A failed strut is a safety concern.
What Is a Reprogrammable ECU?
The The ECU, or engine control unit, is part of your car’s computerized brain and is responsible for monitoring and managing all aspects of engine operation. For anyone who isn’t interested in upgrading their car for higher performance, the stock...
How to Get Smog Technician Certified in Georgia
Automotive technician jobs include smog certified emissions inspectors. In Georgia, you need to be employed at an emissions testing station.

Power seat not moving forwards or backwards

Hi. The power seat has different motors that control the seat's movement. One moves the seat forward and back, another up and down, and another for tilting. All the motors work separately but connect to the same switch. The switch...

how do i know if i have an bad PCM

PCM's are usually replaced at the end of a "process of elimination". That is, with most engine management control failures, there are a whole host of common causes that are evaluated first. Once that long list of most common causes...

The brake pedal sinks to the floor and it won't bleed

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com