Chevrolet C2500 Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Chevrolet C2500 Car Battery Replacement is $278 with $138 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1992 Chevrolet C2500V8-5.7L	Service typeCar Battery Replacement	Estimate$504.68	Shop/Dealer Price$595.70 - $860.66
1993 Chevrolet C2500V8-6.5L Turbo Diesel	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$584.92 - $848.56
1999 Chevrolet C2500V8-7.4L	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$584.95 - $848.60
1999 Chevrolet C2500V8-5.0L	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$584.95 - $848.60
1994 Chevrolet C2500V8-7.4L	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$586.42 - $851.18
1991 Chevrolet C2500V8-5.7L	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$585.09 - $848.85
1997 Chevrolet C2500V8-5.7L	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$584.96 - $848.63
1993 Chevrolet C2500V6-4.3L	Service typeCar Battery Replacement	Estimate$495.67	Shop/Dealer Price$584.95 - $848.60

Show example Chevrolet C2500 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(31)

Rating Summary

30

1

0

0

0

30

1

0

0

0

SEE REVIEWS NEAR ME

Anthony

10 years of experience

49 reviews

Request Anthony

Anthony

10 years of experience

Request Anthony

by Matthew Rich

C2500 1992 - Car is not starting - Bolingbrook, IL

My experience with him was great made it out at the time that it was set for to diagnose my vehicle he was professional he was very good at going over everything and explaining what was wrong with my vehicle

Chris

13 years of experience

490 reviews

Chris

13 years of experience

by Candido Garcia Jr

C2500 1995 - Engine Compression Test - Richmond, TX

Good and reliable .

Chris

13 years of experience

490 reviews

Chris

13 years of experience

by Candido Garcia Jr

C2500 1995 - Spark Plugs - Richmond, TX

Good and reliable .

Chris

13 years of experience

490 reviews

Chris

13 years of experience

by Candido Garcia Jr

C2500 1995 - Ignition Cable (Spark plug wires) - Richmond, TX

Good and reliable .

Excellent Rating

(31)

Rating Summary

30

1

0

0

0

30

1

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

How to Customize Your Classic Chevy Pickup

There There are some vehicles that stand the test of time, proving they are functional, attractive, and in demand several decades after they were originally manufactured. One such vehicle is the Chevy pickup truck. The Chevrolet lineup has included pickup...

How Much Does a Mechanic Make in Rhode Island?

Automotive technician jobs in Rhode Island have an mean mechanic salary of $40k, with some mechanics earning more than $58k.

P2002 OBD-II Trouble Code: Diesel Particulate Filter Efficiency Below Threshold Bank 1

P2002 means there is an efficiency issue with the particulate filter in the exhaust, likely due to a faulty filter or sensor, or exhaust leak.

Oil all over engine

Hello. First we need to clarify if the leak was fixed or not. This must be done first. Then after the oil is cleaned, we can see if there was any other damage. Oil contamination can get onto electrical components...

should I disconnect the battery?

Hello. Thank you for writing in. There is absolutely no issue with disconnecting the battery (https://www.yourmechanic.com/services/service-battery-cables) while you are gone. It also gives added protection from it be stolen while you are away. If you choose to disconnect the battery,...

It's a 2003 ford explorer I was wanting to buy it for the low I drove it maybe 1 mile and it will shift into a gear but will not move in d or rev how can I detect the problem before I buy it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com