Chevrolet Aveo5 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(68)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(68)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet Aveo5 Power Steering Pressure Hose Replacement is $221 with $81 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Chevrolet Aveo5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$405.90Shop/Dealer Price$472.23 - $663.10
2008 Chevrolet Aveo5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$307.19Shop/Dealer Price$349.32 - $471.60
2007 Chevrolet Aveo5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$307.19Shop/Dealer Price$349.35 - $471.64
2009 Chevrolet Aveo5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$396.89Shop/Dealer Price$461.47 - $651.04
2011 Chevrolet Aveo5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$396.89Shop/Dealer Price$462.95 - $653.62
2006 Chevrolet Aveo5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$705.03Shop/Dealer Price$836.43 - $1224.81
Show example Chevrolet Aveo5 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(68)

Rating Summary
64
1
0
1
2
64
1
0
1
2

Robert

43 years of experience
232 reviews
Robert
43 years of experience
Chevrolet Aveo5 L4-1.6L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Cypress, Texas
Good

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Chevrolet Aveo5 L4-1.6L - Check Engine Light is on Inspection - Santa Clara, California
Excellent

Terrell

42 years of experience
48 reviews
Terrell
42 years of experience
Chevrolet Aveo5 L4-1.6L - Drive Belt Tensioner - Austin, Texas
Great mechanic

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Chevrolet Aveo5 L4-1.6L - Catalytic Converter - Houston, Texas
It was great.

Excellent Rating

(68)

Rating Summary
64
1
0
1
2
64
1
0
1
2
Number of Chevrolet Aveo5 services completed
748+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace a Car Trunk Light Bulb
Car trunks are lit by a trunk light for both convenience and safety. Replacing a bad bulb is important for nighttime emergency roadside situations.
How to Replace a Car Window Motor/Window Regulator Assembly
Car window motors and regulators move car windows up and down. If the car window regulator assembly fails, the window will automatically drop down.
P0454 OBD-II Trouble Code: Evaporative Emission Control System Pressure Sensor Intermittent
P0454 means there is an issue with the evaporative emission control system due to faulty fuel cap, solenoid, or broken hoses, canister, or vacuum.

How do I install the top tether for a forward-facing car seat?

If your child’s forward facing car seat has a top tether, it can offer additional security and safety. Installing it is pretty simple, too. Here’s how: Make sure the car seat is correctly positioned in the seat. Raise and then...

I have a 1994 toyta camry XLE V6 what is better to use for an oil change, Conventional or Synthetic Oil?

Using a good quality synthetic oil will cost you about twice as much as conventional oil, but you only have to change it half as often. So there's not much of a long term difference in cost unless you have...

Hi Roy i changed the Relay and it stalled again ,dow i have to change the cam sensers befor it dos not stall

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com