Chevrolet Avalanche 2500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet Avalanche 2500 Front Crankshaft Seal Replacement is $385 with $63 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chevrolet Avalanche 2500V8-8.1LService typeFront Crankshaft Seal ReplacementEstimate$483.18Shop/Dealer Price$523.13 - $624.35
2002 Chevrolet Avalanche 2500V8-8.1LService typeFront Crankshaft Seal ReplacementEstimate$462.46Shop/Dealer Price$498.34 - $596.52
2004 Chevrolet Avalanche 2500V8-8.1LService typeFront Crankshaft Seal ReplacementEstimate$462.46Shop/Dealer Price$498.40 - $596.62
2005 Chevrolet Avalanche 2500V8-8.1LService typeFront Crankshaft Seal ReplacementEstimate$462.46Shop/Dealer Price$498.40 - $596.61
2006 Chevrolet Avalanche 2500V8-8.1LService typeFront Crankshaft Seal ReplacementEstimate$462.46Shop/Dealer Price$501.79 - $602.55
Show example Chevrolet Avalanche 2500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(5)

Rating Summary
4
1
0
0
0
4
1
0
0
0

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Power Steering Pump - Indianapolis, Indiana
Excellent Customer Service

Vladimir

11 years of experience
214 reviews
Vladimir
11 years of experience
Chevrolet Avalanche 2500 V8-8.1L - camshaft position sensor pigtail - Elk Grove, California
Vladimir is very knowledgeable with electrical systems and has been a great mechanic for my vehicle. He often goes above and beyond to help diagnose or fix any issues. Such a pleasure working with someone that knows what he's talking about and can help explain the issues or give advice on how to resolve your issues. His availability is top notch and he even makes the trek to where you are to help. Can't say enough about his workmanship and professionalism.

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Oil Change - Elk Grove, California
Professional and was on time Very pleased and will use again.

Faraz

23 years of experience
142 reviews
Faraz
23 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Transfer case fluid is low - Pleasanton, California
Great experience!

Excellent Rating

(5)

Rating Summary
4
1
0
0
0
4
1
0
0
0
Number of Chevrolet Avalanche 2500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Volvo S60
When When it comes to safety, no automobile manufacturer can hold a candle to Volvo. With their 2012 S60, the popular brand added some real character and a lot of great features, too. If you want a sedan that compares...
B1949 OBD-II Trouble Code: Climate Control Water Temperature Sensor Circuit Failure
B1949 means there is a failure in the circuit for the climate control water temperature sensor, likely due to an electrical problem somewhere.
Disabled Driving Laws and Permits in Iowa
Driver Driver disability laws vary by state. It is important that you know the rules and regulations not only for the state in which you live, but also for states that you might visit or travel through. How do I...

No parking light bulbs, the good fuses blew. Removed all of the parking bulbs and replaced the fuses. The fuse didn't blow till a bulb is plugged in.

Hello. You likely have a short somewhere in the circuit. This may be related to other light circuits, a terminal or connection, or by a damaged wire. You can start by performing a visual inspection. A rule of thumb is...

2009 Honda Civic. Deep vibration from front passenger side. Lessens when in motion. Worse when put into reverse.

A possibility is a faulty motor mount or other engine vibration dampener. A faulty harmonic balancer is also a possibility. Failing bearings in any of the components driven by the serpentine belt could potentially cause this, too. Engine misoperation is...

It wouldn’t start, so I boosted it this morning and is tunning \*running but im just wondering if I should get a new battery But I got a new battery like 6 months ago

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com