Cadillac Escalade ESV Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(159)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(159)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Cadillac Escalade ESV Throttle Body Replacement is $306 with $166 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Cadillac Escalade ESVV8-6.2LService typeThrottle Body ReplacementEstimate$486.48Shop/Dealer Price$575.65 - $828.99
2008 Cadillac Escalade ESVV8-6.2LService typeThrottle Body ReplacementEstimate$813.29Shop/Dealer Price$983.32 - $1486.21
2004 Cadillac Escalade ESVV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1258.47 - $1891.60
2007 Cadillac Escalade ESVV8-6.2LService typeThrottle Body ReplacementEstimate$813.29Shop/Dealer Price$983.37 - $1486.28
2018 Cadillac Escalade ESVV8-6.2LService typeThrottle Body ReplacementEstimate$477.47Shop/Dealer Price$563.67 - $814.78
2012 Cadillac Escalade ESVV8-6.2LService typeThrottle Body ReplacementEstimate$968.25Shop/Dealer Price$1177.31 - $1796.63
2014 Cadillac Escalade ESVV8-6.2LService typeThrottle Body ReplacementEstimate$980.81Shop/Dealer Price$1192.79 - $1821.37
2005 Cadillac Escalade ESVV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1258.46 - $1891.59
Show example Cadillac Escalade ESV Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(159)

Rating Summary
151
5
1
0
2
151
5
1
0
2

Luis

30 years of experience
119 reviews
Luis
30 years of experience
Cadillac Escalade ESV V8-6.2L - Exterior Door Handle Replacement (Passenger Side Rear) - Barrington, Illinois
Friendly, professional and competent.

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Cadillac Escalade ESV V8-6.2L - Brake System Flush - Glendale, California
A true professional that not only gets the job done, but gets it done right. Highly recommended.

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Cadillac Escalade ESV V8-6.0L - Car is making a noise - Alamo, California

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Cadillac Escalade ESV V8-6.0L - Car is not starting - Midvale, Utah
Joseph was very helpful. It was nice to finally find a solution to the problem.

Excellent Rating

(159)

Rating Summary
151
5
1
0
2
151
5
1
0
2
Number of Cadillac Escalade ESV services completed
1749+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy for Highway Driving
Do Do you spend hours each week on the highway for work? Maybe you just live in a very rural area and have to drive for 30 or 45 minutes to get to the grocery store. Whatever the case, your...
The Guide To Colored Curb Zones in New York
New New York parking laws: understanding the basics If you are a licensed driver in the state of New York, you are likely well aware of the various laws regarding the roads. You know the speed limits and you know...
How Do Oil Filters Work?
At At the most basic level, oil filters serve the purpose of preventing contaminants, such as dirt and debris, from reaching the oil in your vehicle. This is important because grit and grime in your oil can damage engine surfaces...

Where is the purge valve located on a Mazda 626

Hey there. On a 2000 Mazda 626 2.0L it is in the passenger side of engine compartment on the firewall. If it is a 2.5L, then it is under and near the brake master cylinder.

My clutch goes all the way to the floor what needs to be repaired

Hi there. When the clutch pedal goes all the way to the floor without any pressure or inability to return to the top automatically, it's usually an indication of a broken sprag (return clutch pedal spring), clutch master cylinder failure...

I have a 2011 Jeep Grand Cherokee Limited, and sometimes when I start it, it turns over, but not without 2-3 seconds of hesitation

Hi Nicole. Thanks for contacting us today. The question I would ask you is whether or not you were having the starting hesitation issue prior to having the vehicle serviced - or if it happened after. If it's been an...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com