Cadillac ELR Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(36)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(36)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Cadillac ELR Power Steering Pressure Hose Replacement is $326 with $186 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Cadillac ELRL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$526.00Shop/Dealer Price$625.05 - $908.03
2016 Cadillac ELRL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$516.99Shop/Dealer Price$612.95 - $893.61
2014 Cadillac ELRL4-1.4L HybridService typePower Steering Pressure Hose ReplacementEstimate$516.99Shop/Dealer Price$612.99 - $893.68
Show example Cadillac ELR Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(36)

Rating Summary
32
1
1
0
2
32
1
1
0
2

Jonathan

36 years of experience
522 reviews
Jonathan
36 years of experience
Cadillac ELR L4-1.4L Hybrid - Car is making a noise - Port Richey, Florida
Awesome guy. Found the issue super fast and fixed it

Daniel

16 years of experience
37 reviews
Daniel
16 years of experience
Cadillac Eldorado V8-8.2L - Power Steering Pressure Hose Replacement - Addison, Texas
Daniel has been very informative and honest.the previous mechanic was wrong in his diagnosis and missed some things as well.

Michael

49 years of experience
124 reviews
Michael
49 years of experience
Cadillac CTS V6-3.6L - Power Steering Pressure Hose - Memphis, Tennessee
He was very great at his job very friendly went above and beyond thanks so much

Jose

17 years of experience
324 reviews
Jose
17 years of experience
Cadillac CTS V6-3.6L - Power Steering Pressure Hose - Hollywood, Florida
Jose was excellent! Highly recommend scheduling with him. He took the time to help me understand the situation and performed the task flawlessly. Jose was courteous, profesional and very knowledable. Thank you for the great experience!

Excellent Rating

(36)

Rating Summary
32
1
1
0
2
32
1
1
0
2
Number of Cadillac Power Steering Pressure Hose Replacement services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Hyundai Santa Fe
Over Over the years, the Hyundai Santa Fe has really started to come into its own as an SUV. The vehicles have always been affordable, and the same holds true with the 2012 model. Key Features The vehicle offers bucket...
P0222 OBD-II Trouble Code: Throttle/Pedal Position Switch/Sensor B Circuit Low Input
P0222 code definition Throttle/Pedal Position Switch/Sensor B Circuit Low Input What the P0222 code means The manufacturer specifies a range of acceptable...
5 Things to Consider Before Becoming a Rideshare Driver
Becoming a rideshare driver may be an exciting career option. Consider the timing, cost, and benefits to driving for rideshare companies.

Problems starting car. Replaced fuel filter.

I would have the fuel system checked out by YourMechanic. They will need to put a pressure gauge on the fuel rail to test for fuel pressure. It sounds like you may have a bad fuel pump, in which case,...

replaced camshaft sensor on 2009 chevy malibu and now it immediately dies after startup

If you have a weak battery or a starter that turns engine too slow can cause the crank or cam signal to not be strong enough and may cause stalling. If the crank sensor is not in sync with the...

Tail lights turning signal, interior lights aren’t working.

All of these electrical faults can be quickly resolved if you request an electrical diagnostic (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection). With regard to the taillights, if the fuse has blown again there is likely a short circuit or very high resistance in the circuit....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com