Cadillac ELR Loud noise is coming from rear brakes Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,854)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,854)

Loud noise is coming from rear brakes Inspection Service

How much does a Loud noise is coming from rear brakes Inspection cost?

On average, the cost for a Cadillac ELR Loud noise is coming from rear brakes Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Cadillac ELRL4-1.4L HybridService typeLoud noise is coming from rear brakes InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2015 Cadillac ELRL4-1.4L HybridService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2016 Cadillac ELRL4-1.4L HybridService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Cadillac ELR Loud noise is coming from rear brakes Inspection prices

Depending on the make and model you drive, you might have disc brakes on the front and drum brakes on the rear, or you could have four-wheel disc brakes. These are becoming more and more common today. However, regardless of the configuration, you should not have a loud noise coming from the rear brakes. This indicates that something has gone wrong, and there are several potential culprits.

How this system works:

Your rear brakes work similar to the front brakes. The master cylinder sends pressurized fluid through the brake lines. If you have rear drum brakes, the fluid causes the actuator to push the brake shoes outward, where they press against the inside of the drum. In the case of rear disc brakes, the fluid activates the caliper, which then squeezes the caliper between two brake pads.

This is identical to how your front brakes operate, but the pads are generally smaller than those used on the front. This is because most of the stopping power in your car is generated in the front.

However, your rear brakes are just as important as the front, and if you’re noticing a loud noise from the rear during braking, it could be a number of different things, depending on the type of noise and when it occurs.

Common reasons for this to happen:

  • Worn Brake Pads: Obviously, the most common potential problem here is worn out rear pads (or shoes if you have drum brakes). If you notice a loud grinding sound, it could be the metal backing plate from the pads making contact with the rotor.

  • Broken or Missing Caliper Bolt: Your calipers are essentially two halves held together with bolts (not the slide pins). If one of the bolts is missing or broken, it’s possible that part of the caliper has popped out and is making contact with your wheel.

  • Contact with the Squealer: Squealers are metal tabs designed to lightly contact the rotor and create a noise that warns you the pads are wearing down. If your pads are nearing the end of their life, it’s possible this is the noise you’re hearing.

  • Parking Brake Shoes Stuck: Your parking brake is located in the rear of the car. In a disc brake setup, there are shoes located inside the inner drum built into the rotor. If the shoes are stuck, it’s possible that the sound you’re hearing is them contacting metal while you’re driving.

  • Wheel Bearing Failure: If the noise you’re hearing is a “howl” and it’s constant, the first thing to suspect would be one of the wheel bearings (whichever side is the loudest while you’re driving).

  • Pads Settling into Place: If the sound you’re hearing is more of a “pop” or a loud click, it might be nothing more than your brake pads being slightly worn and settling into place when you push the brake pedal.

  • Normal Pad Vibration: If you only hear the noise when you’re backing up, it’s possible that it is just a normal vibration caused by the friction material of the pad lightly contacting the rotor’s surface. This is called “resonant frequency”, and can occur with both disc and drum brakes.

What to expect:

A top-rated mobile mechanic will come to your home or office and will inspect your rear brakes. This inspection will include the drums and shoes or the rotors and calipers. It should also include the brake lines and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your rear brake pads, the rotors, calipers, and the brake lines. It may be necessary to remove one or both rear wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify any and all noises.

How important is this service?

The mechanic will visually inspect the rear brakes, as well as other components that might be causing the noise you’re experiencing. It might be necessary for the mechanic to test drive the vehicle in order to duplicate the noise and better diagnose the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(2,854)

Rating Summary
2,684
88
18
16
48
2,684
88
18
16
48

Kenneth

20 years of experience
792 reviews
Kenneth
20 years of experience
Cadillac Seville V8-4.6L - Tune-up - Los Angeles, California
Knows his job and experience.

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Cadillac Escalade V8-6.2L - Battery - Tampa, Florida
Excellent service

Jonathan

22 years of experience
304 reviews
Jonathan
22 years of experience
Cadillac Escalade V8-6.0L - Oil Cooler Lines - Commerce City, Colorado
Jonathan was the mechanic that I've been looking for for years. He was early, very knowledgeable and took pride in what he was doing. Finally, when I need a mechanic I know who to call. THANKS!!!

Andrew

25 years of experience
150 reviews
Andrew
25 years of experience
Cadillac SRX V6-3.6L - Battery - Conyers, Georgia
This was my first time using "Your Mechanic" Andrew showed up on time, was very professional and knowledgeable. He diagnosed my problem and quickly got my car up and running in no time. Andrew went above and beyond my expectations. I will definitely use "Your Mechanic" for any of my future car needs and would highly recommend Andrew!!!

Excellent Rating

(2,854)

Rating Summary
2,684
88
18
16
48
2,684
88
18
16
48
Number of Cadillac services completed
31394+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
900+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Colorado
Right-of-way Right-of-way laws are in place to ensure that if there are no traffic signs or signals, there are still rules in place that govern who goes first. These rules are based in courtesy and common sense, and work to...
P2571 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Temperature Sensor Circuit 4 Intermittent/Erratic
P2571 P2571 code definition A P2571 trouble code indicates that the Powertrain Control Module (PCM) has detected higher-than-normal voltage from the direct control ozone reduction catalyst temperature sensor. Other related trouble codes include P2567, P2568 (https://www.yourmechanic.com/article/p2568-obd-ii-trouble-code-direct-o-zone-reduction-catalyst-temperature-sensor-circuit-range-performance-by-jay-safford), P2569, P2570, P2572 (https://www.yourmechanic.com/article/p2572-obd-ii-trouble-code-direct-ozone-reduction-catalyst-deterioration-sensor-circuit-4-by-jay-safford),...
How to Replace a Car Track Bar
Replacing a track bar involves lifting the car in the air and using a wrench to tighten the bar at the correct torque specification.

Truck cranks but won't start after switching led light bar switch.

Hi there. Although we do not provide specific advice on mechanical issues due to aftermarket part accessory add-on's, it is quite possible that the addition of the amp switch, it's impacted the ignition system. I would start by verifying that...

I changed my spark plugs and ignition coils and now my car wont start it just clicks i have a 2002 jaguar s type v6 3.0

Hello, thank you for writing in. There are several issues that may have occurred. The first step is to make sure the ignition wires are installed correctly, and that you did not mix up the firing order. You can do...

High idle and poor gas on my 92 Chevy s10 4.3 . How can I fix this?

Hi Dominga. Thanks for submitting your question today. There could be several mechanical problems causing the high idle and excessive fuel consumption. Usually, it is something simple - like a loose vacuum line, dirty or damaged mass air flow sensor...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com