Cadillac Catera Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Cadillac Catera Power Steering Pressure Hose Replacement is $322 with $154 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Cadillac CateraV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$544.38Shop/Dealer Price$641.54 - $915.99
1997 Cadillac CateraV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$533.57Shop/Dealer Price$627.01 - $898.69
2001 Cadillac CateraV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$483.69Shop/Dealer Price$564.72 - $799.02
2000 Cadillac CateraV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$483.69Shop/Dealer Price$564.71 - $799.01
1999 Cadillac CateraV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$483.69Shop/Dealer Price$567.81 - $804.43
Show example Cadillac Catera Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Cadillac Catera V6-3.0L - Serpentine/Drive Belt Replacement - Auburn, Washington
Excellent service. Good work and took plenty of time to discuss problem and explain solution.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Cadillac Catera V6-3.0L - Coolant is leaking - Campbell, California
I really enjoy working with Pardeep, he's always on time, courteous, professional, and is extremely knowledgeable. I will be placing a new quote for my painting van, and I look forward to his next visit. David Knapp

Julio

28 years of experience
67 reviews
Julio
28 years of experience
Cadillac Catera V6-3.0L - Oil Change - Orlando, Florida

Mark

19 years of experience
72 reviews
Mark
19 years of experience
Cadillac Catera V6-3.0L - Fuel is leaking from gas tank - Cincinnati, Ohio
Quite a good experience actually. Didn't expect that.

Excellent Rating

(15)

Rating Summary
15
0
0
0
0
15
0
0
0
0
Number of Cadillac Catera services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P2159 OBD-II Trouble Code: Vehicle Speed Sensor B Range/Performance
Diagnostic Trouble Code (DTC): P2159 P2159 code definition Vehicle Speed Sensor B Range/Performance Related Trouble Codes: P2158: Vehicle Speed Sensor B P2160:...
The Guide to Legal Car Modifications in Georgia
ARENA Creative / Shutterstock.com Whether you currently live in Georgia or are planning to move to the state, there are laws in place that you have to follow to make sure your vehicle modifications are street legal...
How to Replace a Yaw Rate Sensor
Yaw rate sensors monitor traction, stability, and the anti-lock braking system to alert you when the car tilts at an unsafe degree.

Taillight not working after bulb replacement

You may have a couple possible problems on this vehicle. The most common problem on these vehicles is the totally intergraded power control module not sending power to the rear lights as it should. Another possible problem is if you...

AC only blows hot air

Hello. We will be happy to assist! To diagnose an AC concern, I first suggest checking the refrigerant levels as it is the most vital component to the health of the AC system. Then, a technician should attempt directly switching...

What is the cost to cut a new ignition key? I live in Lincoln, NE if that matters.

I would suggest calling a locksmith and explain the problem that you have to see if they have the capability to help you out. Unfortunately, I do not think they can but it will not hurt to give them a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com