Buick Skylark Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Buick Skylark Power Steering Pressure Hose Replacement is $184 with $44 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Buick SkylarkL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$545.56Shop/Dealer Price$643.29 - $927.55
1994 Buick SkylarkV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$412.15Shop/Dealer Price$466.65 - $624.40
1993 Buick SkylarkL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$292.23Shop/Dealer Price$316.79 - $384.62
1991 Buick SkylarkL4-2.5LService typePower Steering Pressure Hose ReplacementEstimate$560.53Shop/Dealer Price$662.56 - $964.04
1995 Buick SkylarkL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$460.51Shop/Dealer Price$529.20 - $724.79
1990 Buick SkylarkL4-2.5LService typePower Steering Pressure Hose ReplacementEstimate$560.53Shop/Dealer Price$662.71 - $964.32
1991 Buick SkylarkV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$786.47Shop/Dealer Price$945.00 - $1415.96
1991 Buick SkylarkL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$535.65Shop/Dealer Price$631.46 - $914.28
Show example Buick Skylark Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(34)

Rating Summary
30
2
0
0
2
30
2
0
0
2

Luke

17 years of experience
138 reviews
Luke
17 years of experience
Buick Skylark V8-5.7L - Car is not starting - Chesterfield, Missouri
1972 Buick Skylark with fresh rebuilt 350 engine. Bored .30 with 10.1 compression, Comp Cam mutha thumper cam, TA performance SP3 intake, performance rocker arms, Holley Carburetor, hooker headers, performance lifters, push-rods and much more. She would not start but Luke diagnosed the problem and got her going! Going VERY well, I must say! Thank you Luke! You are the man!

Patrick

12 years of experience
159 reviews
Patrick
12 years of experience
Buick Skylark V8-5.7L - Fuel Pump Replacement - Scottsdale, Arizona
Excellent work. Fast and efficient. I appreciate Patrick taking the time to explain the work completed and doing a look over of the engine and his recommendation on what may need future work. Patrick arrived on time, is highly knowledgeable and professional in his work and manner. I will definitely use My mechanic and Patrick for future car work.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Buick Skylark V8-5.7L - Car is not starting - Hampton, Virginia
Outstanding Mech.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Buick Skylark V8-5.7L - Fuel Pump Tank Seal - Hampton, Virginia
Great Service provided

Excellent Rating

(34)

Rating Summary
30
2
0
0
2
30
2
0
0
2
Number of Buick Skylark services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're a Personal Trainer
As As a personal trainer, you either operate out of a gym, or you go to your clients. Either way, you probably don’t have to haul any more gear than what fits into your gym bag, so your main focus...
P2564 OBD-II Trouble Code: Turbocharger Boost Control Position Sensor Circuit Low
P2564 code means that the boost levels are not within the normal parameters due to a dirty air filter, manifold issues, or failed intercooler.
Symptoms of a Bad or Failing Support Bearing
Common signs include unusual noises and shuddering during acceleration.

Coolant blowing out tailpipe

Hi there. A coolant leak on the these GM vehicles is common due to failures in core plugs. Core plugs are holes where block castings are filled from, and sealed to keep coolant in. I would have a certified mechanic...

Where is the theft system located

The theft system of your vehicle is usually located in the steering column. This is due to the fact that the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) is in this location and one of the major functions of the security system is to...

Oil Change

The maintenance minder in the vehicle computer, that reports remaining oil life as a percent, is the only authoritative guide to scheduling an oil change, subject to one caveat: change the engine oil at least once per year, regardless of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com