Buick Roadmaster Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(29)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(29)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Buick Roadmaster Distributor Replacement is $354 with $186 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Buick RoadmasterV8-5.7LService typeDistributor ReplacementEstimate$638.64Shop/Dealer Price$756.12 - $1098.84
1995 Buick RoadmasterV8-5.7LService typeDistributor ReplacementEstimate$547.15Shop/Dealer Price$642.34 - $922.96
1996 Buick RoadmasterV8-5.7LService typeDistributor ReplacementEstimate$707.91Shop/Dealer Price$843.32 - $1244.53
1994 Buick RoadmasterV8-5.7LService typeDistributor ReplacementEstimate$547.15Shop/Dealer Price$642.37 - $923.01
1992 Buick RoadmasterV8-5.7LService typeDistributor ReplacementEstimate$627.83Shop/Dealer Price$744.99 - $1087.46
Show example Buick Roadmaster Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(29)

Rating Summary
27
1
0
1
0
27
1
0
1
0

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
Roadmaster 1996 - Distributor - Indianapolis, IN
Experience mechanic!

Gregory

208 years of experience
385 reviews
Gregory
208 years of experience
Roadmaster 1994 - Electrical components are not working - Denver, CO
Besides being 40 minutes late, he was knowledgeable, found the problem and got my vehicle started. He could not replace the fuse box that is the problem as it is not available, for a '94 Buick Roadmaster.

Excellent Rating

(29)

Rating Summary
27
1
0
1
0
27
1
0
1
0
Number of Buick Roadmaster services completed
319+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Windshield Laws in Washington
Any Any time you drive a vehicle on the roads in Washington, you know you have to follow the traffic rules to make sure you and those around you make it to the desired destination. Motorists are also required to...
What Components of the Suspension or Steering Systems Are Prone to Fail?
In In automotive usage, the term "suspension" refers to all of the parts that connect the vehicle to the road. Every car, truck, and utility vehicle has a suspension that is designed to do three things: Support the vehicle Absorb...
How Long Does a Fuel Rail Sensor Last?
The The amount of pressure that is in a car’s fuel system is important and something that is heavily monitored. Without the proper amount of fuel pressure, the gas will not be able to properly circulate. This lack of circulation...

Getting code P0131 rough idle, loud, and smell exhaust fumes

Hello. Codes P0456 (https://www.yourmechanic.com/article/p0456-obd-ii-trouble-code-evaporative-emissions-system-small-leak-detected-by-jay-safford) and P0131 (https://www.yourmechanic.com/article/p0131-obd-ii-trouble-code-oxygen-sensor-fault) can come up from a serious exhaust leak. From what you are explaining, it sounds like this is the issue. The exhaust leak will need to be located and repaired before further testing....

Engine is misfiring - 2001 Nissan Maxima

There are some "interrelationships" between "parts" of the exhaust system and engine misfiring. First of all, if the engine is actively misfiring, this will destroy the catalytic converter which is often the most expensive exhaust system component. Of course, that...

What all do I need for a power steering pump replacement?

As long as the pump is still full of fluid without any fluid loss then you will need a new replacement power steering pump and enough fluid to drain and refill the system completely. This should be no more than...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com