Buick Envision Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Buick Envision Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Buick EnvisionL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2022 Buick EnvisionL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Buick EnvisionL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Buick EnvisionL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2017 Buick EnvisionL4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2019 Buick EnvisionL4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2020 Buick EnvisionL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 Buick EnvisionL4-2.0L TurboService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Envision Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Collins

12 years of experience
493 reviews
Collins
12 years of experience
Buick Envision L4-2.5L - Oil Change - Atlanta, Georgia
Punctual. Collins did a great job! Look forward to booking again.

James

30 years of experience
877 reviews
James
30 years of experience
Buick Envision L4-2.0L Turbo - Door does not lock or open Inspection - Winter Garden, Florida
Amazing and super friendly. Very knowledgeable and enjoyed his time

Nick

7 years of experience
12 reviews
Nick
7 years of experience
Buick Envision L4-2.5L - Windshield Washer Pump Replacement (Front) - Houston, Texas
Came early, fixed the problem, in and out in a jiffy!

Alex

20 years of experience
137 reviews
Alex
20 years of experience
Buick Envision L4-2.0L Turbo - Car is not starting - Crest Hill, Illinois
Very professional. In and out. Great job. Thank You

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Buick Envision services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...
How to Get an Iowa Driver's Permit
Like Like most states, Iowa requires all underage drivers to participate in a Graduated Driver Licensing program. This program states that those under 18 must obtain a learner’s permit that graduates to a full license as the driver gains experience...
How to Replace a Transmission Oil Pressure Switch
A transmission oil pressure switch relays measurements from the pump. If the filter is clogged, this switch puts the transmission into limp mode.

oil low 2000 miles

Hello. When vehicles have higher mileage, it will burn oil faster and will lose a half-quart to a full-quart every 1,500-2,000 miles after the oil has been changed. This is normal for vehicles with higher mileage and does not require...

Brake Pad or Caliper Issue?

It is normal for the front brakes to last about 35k to 40k miles before needing to be replaced. When the brake pads were replaced it should of been noted if the right pads were worn down to 3mm and...

9 codes at onece

Hello there. Typically when an engine runs rough when it's cold, it tends to be due to a problem with the fuel to air ratio not being corrected and fine-tuned by sensors. The OBD-II trouble codes you've posted seem to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com