Buick Enclave Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(261)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(261)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Buick Enclave Power Steering Pump Replacement is $492 with $156 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1179.54Shop/Dealer Price$1277.59 - $1526.36
2016 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1578.54Shop/Dealer Price$1779.06 - $2357.51
2008 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1345.54Shop/Dealer Price$1487.96 - $1891.76
2011 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1345.54Shop/Dealer Price$1487.95 - $1891.75
2012 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1345.54Shop/Dealer Price$1496.20 - $1906.19
2009 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1345.54Shop/Dealer Price$1488.74 - $1893.13
2010 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1345.54Shop/Dealer Price$1488.04 - $1891.91
2013 Buick EnclaveV6-3.6LService typePower Steering Pump ReplacementEstimate$1345.54Shop/Dealer Price$1487.95 - $1891.75
Show example Buick Enclave Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(261)

Rating Summary
246
8
1
2
4
246
8
1
2
4

Rohon

49 years of experience
147 reviews
Rohon
49 years of experience
Buick Enclave V6-3.6L - Power Steering Pump - West Palm Beach, Florida
Very friendly, detailed, and professional.

MICHAEL

34 years of experience
184 reviews
MICHAEL
34 years of experience
Buick Enclave V6-3.6L - Thermostat - Bristol, Pennsylvania
One of the best mechanics I have ever met he really takes Pride in his job he's definitely go that extra mile for you thank you so much Michael

Travis

14 years of experience
691 reviews
Travis
14 years of experience
Buick Enclave V6-3.6L - Oil Pressure Sensor - Saint Paul, Minnesota
Was very professional about what vehicle diagnosis, Knew exactly how to fix the issue replacing the oil pressure sensor. Would recommend 5/5 stars on any service by Travis.

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Buick Enclave V6-3.6L - Spark Plugs - Charlotte, North Carolina
Fast courteous service

Excellent Rating

(261)

Rating Summary
246
8
1
2
4
246
8
1
2
4
Number of Buick Enclave services completed
2871+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Washington
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Washington through the Universal Technical Institute.
P0219 OBD-II Trouble Code: Engine Overspeed Condition
P0219 trouble code definition Engine overspeed condition What the P0219 code means The P0219 code means that the revolutions per minute of...
A Buyer’s Guide to the 2012 Mini Cooper Roadster
The The Mini Cooper Roadster was made in conjunction with the Mini Coupe, but went on sale four months prior to the Coupe. It is the sixth Mini version since 2001 when BMW revived the brand. The Roadster is a...

My car won't start when I turn the key, I have to press on gas for it to start

Hi there. It sounds like a coincidence that it started when the gas pedal was pressed. The most common issue on the Mazda 6 is the key itself. If the computer does not pick it up correctly, then it will...

My car shuts off while driving and then turns back on multiple times or shuts off after driving and car turns off.

Hi there. Check the alternator and make sure that the wiring it connected tight. Check the battery cables and make sure that they are tight and clean. Look for any loose ground wires to the chassis on the vehicle. If...

Do I need a new transmission?

The leak might be transmission fluid. If the transmission has been leaking for a while, the fluid level could have fallen low enough to cause engagement and shift difficulties. Therefore, you should first check the fluid level. If low, add...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com